Page not found

About searching
  1. Change device vendor ID and product ID

    Change device vendor ID and product ID Hi, I am trying to …

    Nikkoura - 2022/01/21 - 00:29 - 1 comment

  2. Invalid Device Descriptor (Afterglow xbox 360 gamepad)

    Invalid Device Descriptor (Afterglow xbox 360 gamepad) … play store. The client on the windows 10 machine did not change since then. Now my two game pad have the same … 07-31 21:10:14.888 8732 8750 D vndksupport: Loading /vendor/lib/hw/ android.hardware.graphics.mapper [at] …

    Patrick_Jack - 2022/08/01 - 12:00 - 5 comments

  3. RetroFlag Pro Controller

    … handheld controller for switch where the product and vendor ID both become 0x0000 and thus is not recognised by … by steam and by the steam link app on android. The USB device info app does show that android can see the VID … #9 Unfortunately did not change… Unfortunately …

    Graybang - 2023/02/28 - 23:07 - 3 comments

  4. Xbox One Wireless Adapter for Windows - Unknown USB Device (Invalid Configuration Descriptor)

    Xbox One Wireless Adapter for Windows - Unknown USB Device (Invalid Configuration Descriptor) … in the same way as described by the OP. The only major change in that time is upgrading Windows 21H2 to 22h2, which … (that doesnt work) and select Properties and tell me the Vendor ID and Product ID. Thanks …

    vhsauce - 2022/09/17 - 04:37 - 32 comments

  5. Error connecting USB device to Linux server

    Error connecting USB device to Linux server Hi, I'm running … loaded (/etc/systemd/system/virtualhere.service; enabled; vendor preset: enabled) Active: active (running) since … select Custom Event Handler.. and paste in this line (dont change anything) onReset.$VENDOR_ID$.$PRODUCT_ID$= …

    drohm - 2019/07/19 - 01:48 - 7 comments

  6. Synology NAS complains about not ejecting USB drive

    … this: sync; umount -f /dev/sdq1; echo 1 > /sys/block/sdq/device/delete Thanks in advance, Tim P.S. I am … on the stick and select properties. Make a note of the Vendor id and Product id. E.g my "STORE N GO" stick is 13FE … work for only the first USB device in the row? Do I have to change anything (e.g. sdq1-x) if I have 4 USB devices …

    B9677A61 - 2014/08/08 - 01:45 - 9 comments

  7. Fanatec Wheel/Pedals with a Yaw2

    … rarely. But I have no disconnects when no other device is connected through the VirtualHere Client. So it …           2      bInterfaceClass       255 Vendor Specific Class      bInterfaceSubClass     … #45 OK, I cant change the Yaw2… OK, I …

    DannyDan - 2023/12/23 - 22:13 - 24 comments

  8. DeviceNicknames Help

    … work's great if i don't change port. OK, I notice if you do by the client app he takes on serial and put after the name, make the vendor and the product id to 0000 and put address 12. … Yes there is two formats for ignoring a device. If the device doesnt have a serial it is just the …

    CoolOn3 - 2019/02/23 - 06:53 - 1 comment

  9. No USB port visible on macos 10.12.2

    … does not appear in the apple system dialog. Even when a device is connected it doesnt show. This tells me they have … | | "bDeviceProtocol" = 1 | | "USB Vendor Name" = "VirtualHere Pty. Ltd." | | "Device … . No change until apple re-adds support . Its "as-is" virtualhere …

    narms - 2017/01/03 - 10:56 - 30 comments

  10. Server Configuration FAQ

    … DeviceNicknames This is in the format <nickname>,<vendor hex value>,<product hex value>,<address decimal> … The address is always the same if the device is plugged into the same port. You should use the … client has a username of "Michael Jones (michael)" you can change the client id to "Mick", then this will appear in the …

    Michael - 2023/04/30 - 08:25