Hi. I would like to know what is better to control astrophotograhpy (cameras, mount, focuser, etc) using a PI4: Custom VirtualHere or VHCloudHub? I'm talking only regarding performance.
Thanks!
Similar performance, the main difference is that cloudhub is much easier to setup and configure. You must use an ethernet cable if you are going to use it for astrophotography because the wifi antenna on the pi4 is not very good and the radio is only 1T1R
Thanks for the reply.
So, I will use VirtualHere through an ethernet cable (already aware about poor wifi range in Pi4).
Any advise regarding Linux version on Pi4? Debian is good enough?
.
Similar performance, the main difference is that cloudhub is much easier to setup and configure. You must use an ethernet cable if you are going to use it for astrophotography because the wifi antenna on the pi4 is not very good and the radio is only 1T1R
.
Thanks for the reply.
So, I will use VirtualHere through an ethernet cable (already aware about poor wifi range in Pi4).
Any advise regarding Linux version on Pi4? Debian is good enough?
.
Definately use Raspberry Pi OS , its the best maintained, Lite should be fine https://www.raspberrypi.org/software/operating-systems/#raspberry-pi-os…
.
Thanks a lot!