I have a RPI 4 running with a virtual server (licenced) runs already ea few months correct but now its not showing any usb ports anymore.
Server is running i can connct to my RPI and on the windows client is the raspberry hub showing. I can chane the usb ports (usb 2/3) on the RPI but it does not help.
RPI broken or something else?
Kind regards
Bart
T
.
Can you type
lsusbat the terminal. Does that show anything?
.
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 15aa:1555 Gearway Electronics (Dong Guan) Co., Ltd.
Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Don't konw how to interpreted but it looks good.
.
BTW it happens a few days after regitering and let it run as a service..?
.
OK i think what is actually happening is just that the client is not finding the server. The server is running fine.
So in the virtualhere client, right click USB Hubs->Specify Hubs->Add and put in the IP address of the server and see if the devices appear
.
Nope, the server shows up in Windows no problem, and shows the raspberry-hub. And i checked auto find-hubs and auto-find all devices and in the hub auto-use all on this hub.
In properties the ip adress with the port is showing and max devices = unlimited and a lot more
.
OK my guess it might just be a power issue. Are you trying to use the Gearway device via virtualhere or?