Tasman Arrow

Submitted by nicko71845 on #1

Trying to use Yawman Arrow on Airgpu virtual machine.

Shows up on server unit (Windows 11) as Yawman Arrow with all functions working but only shows on Airgpu (Windows 10) as Xbox 360. The extra functions of the Arrow are not available.

Server and client both seem to install ok but no usb servers are seen by client. Only shows “USB Servers” root directory when right clicked in client.

I have Viture XR glasses connected via usb 4 to server machine as well but I guess these don’t count towards the one usb limit on the trial version. Happy to pay for a licence but not if I can’t get full functionality from the Yawman Arrow

 

Submitted by Michael on Thu, 2025/01/16 - 19:34

#2

In the virtualhere client, right click USB Servers->Specify Server->Add and put in the ip address of the virtualhere server machine.

Submitted by nicko71845 on Thu, 2025/01/16 - 20:39

#3

Yep done that. It adds four digits after the ip address I type (7372 from memory) which can’t be deleted.  
It is the ipv4 address we need?

Submitted by Michael on Thu, 2025/01/16 - 20:43

#4

That is the port 7575.

You need to figure out your IP address of your server if they cant automatically find each other. E.g a firewall in the way or different LAN.


if you put the correct IP address in the server will appear in the client.

Submitted by nicko71845 on Thu, 2025/01/16 - 21:13

#5

I enter the correct ip address 

xxx.xxx.x.xxx

The port number gets tacked on the end automatically and it can’t be edited out. The client then wont connect. 

I’ll try again later and post the log here.