MFC-Printer on Raspberry Pi 2 Server not usable on OS X Client

Submitted by t0bias on #1

<p>Hi,
</p>
<p>I'm running VirtualHere (3.0.9) on a Raspberry Pi 2 (optimized Version) as a Server.<br />
I have a Brother MFC-J410 Printer connected to the Server.<br />
My OS X Client (10.9.5) does show the Printer (and the Rpi Server...) and I can also select the Printer and choose "Use it".<br />
Even though it says "in use by you" the OS printing tool as well as the Brother utility keep on saying the Printer is not connected (and printing regardless of that information doesn't work).
</p>
<p>Did I miss some configuration?</p>

Submitted by Michael on Tue, 2015/09/29 - 22:48

#2

Take a look in Finder - Utilities console viewer and filter by USB and paste messages in here

Submitted by t0bias on Tue, 2015/09/29 - 22:54

#3

<p>29.09.15 14:53:02.000 kernel[0]: USBF: 1004.850 com_virtualhere_vhhcd::createControlMsg device with function address 2 is not connected!<br />
29.09.15 14:53:02.000 kernel[0]: USBF: 1005. 42 com_virtualhere_vhhcd::bindDevice Full speed device at remote address 4 is now attached local port[1] and is device zero<br />
29.09.15 14:53:02.000 kernel[0]: USBF: 1005.149 com_virtualhere_vhhcd::hubPortReset port[1]<br />
29.09.15 14:53:02.000 kernel[0]: USBF: 1005.159 com_virtualhere_vhhcd::gatedHubResetPortTimerFired port[1] ok<br />
29.09.15 14:53:03.000 kernel[0]: USBF: 1005.270 com_virtualhere_vhhcd::hubResetResetChange port[1]<br />
29.09.15 14:53:03.000 kernel[0]: USBF: 1005.353 com_virtualhere_vhhcd::setDeviceAddress port[1] now assigned function address 2 and remote address 4<br />
29.09.15 14:53:42.000 kernel[0]: USBF: 1045. 67 WARNING, com_virtualhere_vhhcd::handleBulkIntMsgAck (id=40, ep89) bulk ack error -108<br />
29.09.15 14:53:42.000 kernel[0]: USBF: 1045. 69 com_virtualhere_vhhcd::hubResetChangeConnection port[1] which was functionAddress 2 and remoteAddress 4, has disconnected<br />
29.09.15 14:53:42.000 kernel[0]: USBF: 1045. 71 com_virtualhere_vhhcd::createControlMsg device with function address 2 is not connected!<br />
29.09.15 14:53:45.000 kernel[0]: USBF: 1048. 73 WARNING, com_virtualhere_vhhcd::handleCtrlMsgAck did not find pending request (id=42)
</p>

Submitted by t0bias on Wed, 2015/09/30 - 05:20

#4

Wait a moment... It works now!
But it only works, if I select "Auto use Device/Port".
Any other "Use" or "Auto-Use" option does not work.

Submitted by Michael on Wed, 2015/09/30 - 09:09

#5

OK, thats weird , i think that device many need a quirk set but if its working ok with the auto-use thats fine too...