I am using Raspberry Pi 4B with Raspberry Pi OS Lite (64-bit) as the VH Server, and 6x Windows 10 PC as the clients.
When I only attach 6 USB dongle (TP-Link UB400) onto the Raspberry Pi, it works flawlessly. Windows PC can recognize the device, and install the appropriate driver automatically.
However, when I attach 6 more device (Razer Blackshark V2 Pro) onto the Raspberry Pi, some of the Bluetooth dongle (around 2 of 6) stop working. It is easy to notice in the Device Manager of Windows PC, the device status says the following:
"Windows has stopped this device because it has reported problems. (Code 43)"
The 6x Bluetooth Dongle (TP-Link UB400) is on a 7-port USB Hub, while the 6 Razer dongle is on a 10-port USB Hub
Below is the dmesg from the Raspberry Pi:
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
[ 0.000000] Linux version 5.15.74-v8+ (dom@buildbot) (aarch64-linux-gnu-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1595 SMP PREEMPT Wed Oct 26 11:07:24 BST 2022
[ 0.000000] random: crng init done
[ 0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.5
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x000000001ac00000, size 320 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff]
[ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000fbffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff]
[ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff]
[ 0.000000] On node 0, zone DMA32: 19456 pages in unavailable ranges
[ 0.000000] On node 0, zone DMA32: 16384 pages in unavailable ranges
[ 0.000000] percpu: Embedded 28 pages/cpu s77336 r8192 d29160 u114688
[ 0.000000] pcpu-alloc: s77336 r8192 d29160 u114688 alloc=28*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: detected: Spectre-v2
[ 0.000000] CPU features: detected: Spectre-v3a
[ 0.000000] CPU features: detected: Spectre-v4
[ 0.000000] CPU features: detected: Spectre-BHB
[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 996912
[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=E4:5F:01:B2:6A:18 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=2bc00b1f-02 rootfstype=ext4 fsck.repair=yes rootwait
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: mapped [mem 0x0000000037400000-0x000000003b400000] (64MB)
[ 0.000000] Memory: 3553908K/4050944K available (11520K kernel code, 1956K rwdata, 4148K rodata, 3840K init, 975K bss, 169356K reserved, 327680K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 38048 entries in 149 pages
[ 0.000000] ftrace: allocated 149 pages with 4 groups
[ 0.000000] trace event string verifier disabled
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7ef00100, parent irq: 10)
[ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[ 0.000001] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[ 0.000330] Console: colour dummy device 80x25
[ 0.000905] printk: console [tty1] enabled
[ 0.000975] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
[ 0.001015] pid_max: default: 32768 minimum: 301
[ 0.001167] LSM: Security Framework initializing
[ 0.001399] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.001481] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.002763] cgroup: Disabling memory control group subsystem
[ 0.005620] rcu: Hierarchical SRCU implementation.
[ 0.006738] EFI services will not be available.
[ 0.007274] smp: Bringing up secondary CPUs ...
[ 0.008456] Detected PIPT I-cache on CPU1
[ 0.008534] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
[ 0.009715] Detected PIPT I-cache on CPU2
[ 0.009766] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
[ 0.010925] Detected PIPT I-cache on CPU3
[ 0.010975] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
[ 0.011124] smp: Brought up 1 node, 4 CPUs
[ 0.011214] SMP: Total of 4 processors activated.
[ 0.011235] CPU features: detected: 32-bit EL0 Support
[ 0.011253] CPU features: detected: 32-bit EL1 Support
[ 0.011274] CPU features: detected: CRC32 instructions
[ 0.044178] CPU: All CPU(s) started at EL2
[ 0.044277] alternatives: patching kernel code
[ 0.045879] devtmpfs: initialized
[ 0.057219] Enabled cp15_barrier support
[ 0.057286] Enabled setend support
[ 0.057324] KASLR enabled
[ 0.057503] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.057551] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.066534] pinctrl core: initialized pinctrl subsystem
[ 0.067363] DMI not present or invalid.
[ 0.068066] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.071803] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.072120] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.073132] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.073244] audit: initializing netlink subsys (disabled)
[ 0.073541] audit: type=2000 audit(0.072:1): state=initialized audit_enabled=0 res=1
[ 0.074083] thermal_sys: Registered thermal governor 'step_wise'
[ 0.074304] cpuidle: using governor menu
[ 0.074613] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.074819] ASID allocator initialised with 32768 entries
[ 0.075001] Serial: AMBA PL011 UART driver
[ 0.088296] bcm2835-mbox fe00b880.mailbox: mailbox enabled
[ 0.112528] raspberrypi-firmware soc:firmware: Attached to firmware from 2022-10-26T11:09:05, variant start
[ 0.116518] raspberrypi-firmware soc:firmware: Firmware hash is c72ad6b26ff40c91ef776b847436094ee63fabee
[ 0.167497] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1
[ 0.171880] vgaarb: loaded
[ 0.172301] SCSI subsystem initialized
[ 0.172529] usbcore: registered new interface driver usbfs
[ 0.172596] usbcore: registered new interface driver hub
[ 0.172674] usbcore: registered new device driver usb
[ 0.173196] usb_phy_generic phy: supply vcc not found, using dummy regulator
[ 0.173407] usb_phy_generic phy: dummy supplies not allowed for exclusive requests
[ 0.173714] pps_core: LinuxPPS API ver. 1 registered
[ 0.173738] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti [at] linux.it>
[ 0.173774] PTP clock support registered
[ 0.175225] clocksource: Switched to clocksource arch_sys_counter
[ 0.263773] VFS: Disk quotas dquot_6.6.0
[ 0.263903] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.264114] FS-Cache: Loaded
[ 0.264362] CacheFiles: Loaded
[ 0.274886] NET: Registered PF_INET protocol family
[ 0.275459] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.278908] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.278984] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.279023] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.279312] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[ 0.279853] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.280109] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.280201] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.280533] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.281535] RPC: Registered named UNIX socket transport module.
[ 0.281569] RPC: Registered udp transport module.
[ 0.281588] RPC: Registered tcp transport module.
[ 0.281608] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.281638] PCI: CLS 0 bytes, default 64
[ 0.284196] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 0.284547] kvm [1]: IPA Size Limit: 44 bits
[ 0.285732] kvm [1]: vgic interrupt IRQ9
[ 0.286012] kvm [1]: Hyp mode initialized successfully
[ 1.162776] Initialise system trusted keyrings
[ 1.163167] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[ 1.169916] zbud: loaded
[ 1.171789] FS-Cache: Netfs 'nfs' registered for caching
[ 1.172490] NFS: Registering the id_resolver key type
[ 1.172539] Key type id_resolver registered
[ 1.172559] Key type id_legacy registered
[ 1.172674] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.172700] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 1.173936] Key type asymmetric registered
[ 1.173965] Asymmetric key parser 'x509' registered
[ 1.174056] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 1.174328] io scheduler mq-deadline registered
[ 1.174355] io scheduler kyber registered
[ 1.182861] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[ 1.182926] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
[ 1.183027] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000
[ 1.183122] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00ffffffff -> 0x0400000000
[ 1.249323] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
[ 1.249693] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[ 1.249725] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.249751] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff])
[ 1.249853] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[ 1.250117] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 1.253880] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 1.254263] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
[ 1.254399] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 1.254841] pci 0000:01:00.0: PME# supported from D0 D3hot
[ 1.258680] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 1.258738] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
[ 1.258771] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
[ 1.258823] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 1.258854] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
[ 1.271035] iproc-rng200 fe104000.rng: hwrng registered
[ 1.271583] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[ 1.273078] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
[ 1.285505] brd: module loaded
[ 1.295002] loop: module loaded
[ 1.295845] Loading iSCSI transport class v2.0-870.
[ 1.300835] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
[ 1.359388] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
[ 1.360512] usbcore: registered new interface driver r8152
[ 1.360590] usbcore: registered new interface driver lan78xx
[ 1.360655] usbcore: registered new interface driver smsc95xx
[ 1.408126] pci 0000:00:00.0: enabling device (0000 -> 0002)
[ 1.408332] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 1.408375] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[ 1.409134] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x00003c0000000890
[ 1.410162] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 1.410196] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[ 1.410231] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[ 1.410674] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[ 1.410710] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.410736] usb usb1: Product: xHCI Host Controller
[ 1.410758] usb usb1: Manufacturer: Linux 5.15.74-v8+ xhci-hcd
[ 1.410780] usb usb1: SerialNumber: 0000:01:00.0
[ 1.411571] hub 1-0:1.0: USB hub found
[ 1.411661] hub 1-0:1.0: 1 port detected
[ 1.412597] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
[ 1.412634] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.412660] usb usb2: Product: xHCI Host Controller
[ 1.412682] usb usb2: Manufacturer: Linux 5.15.74-v8+ xhci-hcd
[ 1.412703] usb usb2: SerialNumber: 0000:01:00.0
[ 1.413368] hub 2-0:1.0: USB hub found
[ 1.413474] hub 2-0:1.0: 4 ports detected
[ 1.415239] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 1.415578] dwc_otg: FIQ enabled
[ 1.415589] dwc_otg: NAK holdoff enabled
[ 1.415598] dwc_otg: FIQ split-transaction FSM enabled
[ 1.415611] Module dwc_common_port init
[ 1.416156] usbcore: registered new interface driver uas
[ 1.416286] usbcore: registered new interface driver usb-storage
[ 1.416506] mousedev: PS/2 mouse device common for all mice
[ 1.422293] sdhci: Secure Digital Host Controller Interface driver
[ 1.422333] sdhci: Copyright(c) Pierre Ossman
[ 1.422992] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.426659] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.427287] hid: raw HID events driver (C) Jiri Kosina
[ 1.427477] usbcore: registered new interface driver usbhid
[ 1.427502] usbhid: USB HID core driver
[ 1.427827] ashmem: initialized
[ 1.436479] NET: Registered PF_PACKET protocol family
[ 1.436632] Key type dns_resolver registered
[ 1.438170] registered taskstats version 1
[ 1.438224] Loading compiled-in X.509 certificates
[ 1.438909] Key type ._fscrypt registered
[ 1.438935] Key type .fscrypt registered
[ 1.438953] Key type fscrypt-provisioning registered
[ 1.450741] uart-pl011 fe201000.serial: there is not valid maps for state default
[ 1.451076] uart-pl011 fe201000.serial: cts_event_workaround enabled
[ 1.451302] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 19, base_baud = 0) is a PL011 rev2
[ 1.460410] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 1.460912] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ 1.462124] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
[ 1.462157] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
[ 1.493915] of_cfs_init
[ 1.494108] of_cfs_init: OK
[ 1.526634] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA
[ 1.527019] Waiting for root device PARTUUID=2bc00b1f-02...
[ 1.599634] mmc1: new high speed SDIO card at address 0001
[ 1.629768] mmc0: new ultra high speed DDR50 SDHC card at address aaaa
[ 1.630763] mmcblk0: mmc0:aaaa SE32G 29.7 GiB
[ 1.634176] mmcblk0: p1 p2
[ 1.634748] mmcblk0: mmc0:aaaa SE32G 29.7 GiB
[ 1.645835] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 1.645961] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 1.651102] devtmpfs: mounted
[ 1.659416] Freeing unused kernel memory: 3840K
[ 1.659649] Run /sbin/init as init process
[ 1.659670] with arguments:
[ 1.659679] /sbin/init
[ 1.659689] with environment:
[ 1.659698] HOME=/
[ 1.659707] TERM=linux
[ 1.667265] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 1.817889] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
[ 1.817954] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.817980] usb 1-1: Product: USB2.0 Hub
[ 1.820111] hub 1-1:1.0: USB hub found
[ 1.820417] hub 1-1:1.0: 4 ports detected
[ 1.983003] systemd[1]: System time before build time, advancing clock.
[ 2.123298] usb 1-1.3: new high-speed USB device number 3 using xhci_hcd
[ 2.163557] NET: Registered PF_INET6 protocol family
[ 2.165479] Segment Routing with IPv6
[ 2.165540] In-situ OAM (IOAM) with IPv6
[ 2.227907] systemd[1]: systemd 247.3-7+deb11u1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[ 2.228944] systemd[1]: Detected architecture arm64.
[ 2.229642] usb 1-1.3: New USB device found, idVendor=2109, idProduct=2813, bcdDevice=90.14
[ 2.229683] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.229711] usb 1-1.3: Product: USB2.0 Hub
[ 2.229733] usb 1-1.3: Manufacturer: VIA Labs, Inc.
[ 2.231537] hub 1-1.3:1.0: USB hub found
[ 2.232308] hub 1-1.3:1.0: 4 ports detected
[ 2.239940] systemd[1]: Set hostname to <raspberrypi>.
[ 2.327353] usb 1-1.4: new high-speed USB device number 4 using xhci_hcd
[ 2.430005] usb 1-1.4: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=92.24
[ 2.430068] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.430097] usb 1-1.4: Product: USB2.0 Hub
[ 2.430120] usb 1-1.4: Manufacturer: GenesysLogic
[ 2.432116] hub 1-1.4:1.0: USB hub found
[ 2.432527] hub 1-1.4:1.0: 4 ports detected
[ 2.567268] usb 1-1.3.1: new full-speed USB device number 5 using xhci_hcd
[ 2.721075] usb 1-1.3.1: New USB device found, idVendor=1532, idProduct=0528, bcdDevice= 1.00
[ 2.721137] usb 1-1.3.1: New USB device strings: Mfr=3, Product=4, SerialNumber=0
[ 2.721165] usb 1-1.3.1: Product: Razer BlackShark V2 Pro
[ 2.721189] usb 1-1.3.1: Manufacturer: Razer
[ 2.771264] usb 1-1.4.1: new full-speed USB device number 6 using xhci_hcd
[ 2.776456] input: Razer Razer BlackShark V2 Pro Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.1/1-1.3.1:1.3/0003:1532:0528.0001/input/input0
[ 2.835732] input: Razer Razer BlackShark V2 Pro as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.1/1-1.3.1:1.3/0003:1532:0528.0001/input/input1
[ 2.836067] input: Razer Razer BlackShark V2 Pro as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.1/1-1.3.1:1.3/0003:1532:0528.0001/input/input2
[ 2.836667] hid-generic 0003:1532:0528.0001: input,hiddev96,hidraw0: USB HID v1.11 Device [Razer Razer BlackShark V2 Pro] on usb-0000:01:00.0-1.3.1/input3
[ 2.890301] systemd[1]: Queued start job for default target Multi-User System.
[ 2.896193] systemd[1]: Created slice system-getty.slice.
[ 2.897945] systemd[1]: Created slice system-modprobe.slice.
[ 2.899312] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 2.900457] systemd[1]: Created slice User and Session Slice.
[ 2.901248] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 2.901985] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 2.903406] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 2.903962] systemd[1]: Reached target Local Encrypted Volumes.
[ 2.904445] systemd[1]: Reached target Paths.
[ 2.904876] systemd[1]: Reached target Slices.
[ 2.905283] systemd[1]: Reached target Swap.
[ 2.906566] systemd[1]: Listening on Syslog Socket.
[ 2.907706] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 2.908404] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 2.909761] usb 1-1.4.1: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=88.91
[ 2.909804] usb 1-1.4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.909923] systemd[1]: Listening on Journal Audit Socket.
[ 2.911037] systemd[1]: Listening on Journal Socket (/dev/log).
[ 2.912470] systemd[1]: Listening on Journal Socket.
[ 2.916273] systemd[1]: Listening on udev Control Socket.
[ 2.917441] systemd[1]: Listening on udev Kernel Socket.
[ 2.918692] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
[ 2.922802] systemd[1]: Mounting POSIX Message Queue File System...
[ 2.927826] systemd[1]: Mounting RPC Pipe File System...
[ 2.933485] systemd[1]: Mounting Kernel Debug File System...
[ 2.939031] systemd[1]: Mounting Kernel Trace File System...
[ 2.940050] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
[ 2.948043] systemd[1]: Starting Restore / save the current clock...
[ 2.959107] systemd[1]: Starting Set the console keyboard layout...
[ 2.965040] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 2.970987] systemd[1]: Starting Load Kernel Module configfs...
[ 2.977238] systemd[1]: Starting Load Kernel Module drm...
[ 2.983910] systemd[1]: Starting Load Kernel Module fuse...
[ 2.992303] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 2.995303] usb 1-1.3.2: new full-speed USB device number 7 using xhci_hcd
[ 2.999335] systemd[1]: Starting File System Check on Root Device...
[ 3.013655] systemd[1]: Starting Journal Service...
[ 3.022863] systemd[1]: Starting Load Kernel Modules...
[ 3.028582] systemd[1]: Starting Coldplug All udev Devices...
[ 3.041980] systemd[1]: Mounted POSIX Message Queue File System.
[ 3.043652] systemd[1]: Mounted RPC Pipe File System.
[ 3.045062] systemd[1]: Mounted Kernel Debug File System.
[ 3.046673] systemd[1]: Mounted Kernel Trace File System.
[ 3.049753] systemd[1]: Finished Restore / save the current clock.
[ 3.053263] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 3.056289] systemd[1]: modprobe [at] configfs.service: Succeeded.
[ 3.057838] systemd[1]: Finished Load Kernel Module configfs.
[ 3.064616] systemd[1]: Mounting Kernel Configuration File System...
[ 3.080095] fuse: init (API version 7.34)
[ 3.088476] systemd[1]: Started File System Check Daemon to report status.
[ 3.101027] systemd[1]: modprobe [at] fuse.service: Succeeded.
[ 3.102599] systemd[1]: Finished Load Kernel Module fuse.
[ 3.107461] systemd[1]: Finished Load Kernel Modules.
[ 3.117282] systemd[1]: Mounted Kernel Configuration File System.
[ 3.125906] systemd[1]: Mounting FUSE Control File System...
[ 3.138230] systemd[1]: Starting Apply Kernel Variables...
[ 3.153514] systemd[1]: Mounted FUSE Control File System.
[ 3.184804] usb 1-1.3.2: New USB device found, idVendor=1532, idProduct=0528, bcdDevice= 1.00
[ 3.184874] usb 1-1.3.2: New USB device strings: Mfr=3, Product=4, SerialNumber=0
[ 3.184906] usb 1-1.3.2: Product: Razer BlackShark V2 Pro
[ 3.184931] usb 1-1.3.2: Manufacturer: Razer
[ 3.191986] systemd[1]: modprobe [at] drm.service: Succeeded.
[ 3.193403] systemd[1]: Finished Load Kernel Module drm.
[ 3.199292] usb 1-1.4.2: new full-speed USB device number 8 using xhci_hcd
[ 3.241609] systemd[1]: Finished Apply Kernel Variables.
[ 3.261574] systemd[1]: Finished File System Check on Root Device.
[ 3.270841] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 3.272441] input: Razer Razer BlackShark V2 Pro Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.2/1-1.3.2:1.3/0003:1532:0528.0002/input/input3
[ 3.331926] input: Razer Razer BlackShark V2 Pro as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.2/1-1.3.2:1.3/0003:1532:0528.0002/input/input4
[ 3.332369] input: Razer Razer BlackShark V2 Pro as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.2/1-1.3.2:1.3/0003:1532:0528.0002/input/input5
[ 3.333003] hid-generic 0003:1532:0528.0002: input,hiddev97,hidraw1: USB HID v1.11 Device [Razer Razer BlackShark V2 Pro] on usb-0000:01:00.0-1.3.2/input3
[ 3.341832] usb 1-1.4.2: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=88.91
[ 3.341868] usb 1-1.4.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.427285] usb 1-1.3.3: new high-speed USB device number 9 using xhci_hcd
[ 3.428447] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null). Quota mode: none.
[ 3.438226] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 3.443083] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 3.443505] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 3.448812] systemd[1]: Starting Load/Save Random Seed...
[ 3.453832] systemd[1]: Starting Create System Users...
[ 3.455296] systemd[1]: Started Journal Service.
[ 3.530626] systemd-journald[140]: Received client request to flush runtime journal.
[ 3.539496] systemd-journald[140]: File /var/log/journal/8b79f42633cd4454a621ec53b2c7f6af/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 3.551922] usb 1-1.3.3: New USB device found, idVendor=2109, idProduct=2813, bcdDevice=90.14
[ 3.551970] usb 1-1.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.551987] usb 1-1.3.3: Product: USB2.0 Hub
[ 3.552002] usb 1-1.3.3: Manufacturer: VIA Labs, Inc.
[ 3.561641] hub 1-1.3.3:1.0: USB hub found
[ 3.564694] hub 1-1.3.3:1.0: 4 ports detected
[ 3.619310] usb 1-1.4.3: new full-speed USB device number 10 using xhci_hcd
[ 3.759126] usb 1-1.4.3: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=88.91
[ 3.759166] usb 1-1.4.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.843323] usb 1-1.4.4: new high-speed USB device number 11 using xhci_hcd
[ 3.954762] usb 1-1.4.4: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=92.24
[ 3.954801] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.954817] usb 1-1.4.4: Product: USB2.0 Hub
[ 3.954830] usb 1-1.4.4: Manufacturer: GenesysLogic
[ 3.957067] hub 1-1.4.4:1.0: USB hub found
[ 3.957461] hub 1-1.4.4:1.0: 4 ports detected
[ 4.047283] usb 1-1.3.3.2: new full-speed USB device number 12 using xhci_hcd
[ 4.207121] usb 1-1.3.3.2: New USB device found, idVendor=1532, idProduct=0528, bcdDevice= 1.00
[ 4.207172] usb 1-1.3.3.2: New USB device strings: Mfr=3, Product=4, SerialNumber=0
[ 4.207189] usb 1-1.3.3.2: Product: Razer BlackShark V2 Pro
[ 4.207288] usb 1-1.3.3.2: Manufacturer: Razer
[ 4.247318] usb 1-1.4.4.1: new full-speed USB device number 13 using xhci_hcd
[ 4.325290] input: Razer Razer BlackShark V2 Pro Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.3/1-1.3.3.2/1-1.3.3.2:1.3/0003:1532:0528.0003/input/input6
[ 4.386039] usb 1-1.4.4.1: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=88.91
[ 4.386081] usb 1-1.4.4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.390842] input: Razer Razer BlackShark V2 Pro as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.3/1-1.3.3.2/1-1.3.3.2:1.3/0003:1532:0528.0003/input/input7
[ 4.393298] input: Razer Razer BlackShark V2 Pro as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.3/1-1.3.3.2/1-1.3.3.2:1.3/0003:1532:0528.0003/input/input8
[ 4.423566] hid-generic 0003:1532:0528.0003: input,hiddev98,hidraw2: USB HID v1.11 Device [Razer Razer BlackShark V2 Pro] on usb-0000:01:00.0-1.3.3.2/input3
[ 4.519304] usb 1-1.4.4.2: new full-speed USB device number 14 using xhci_hcd
[ 4.659329] usb 1-1.4.4.2: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=88.91
[ 4.659384] usb 1-1.4.4.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.743316] usb 1-1.3.3.3: new full-speed USB device number 15 using xhci_hcd
[ 4.744904] mc: Linux media interface: v0.10
[ 4.770921] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[ 4.785234] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[ 4.785274] [vc_sm_connected_init]: start
[ 4.786390] [vc_sm_connected_init]: installed successfully
[ 4.872453] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[ 4.879189] videodev: Linux video capture interface: v2.00
[ 4.942942] usb 1-1.3.3.3: New USB device found, idVendor=1532, idProduct=0528, bcdDevice= 1.00
[ 4.942984] usb 1-1.3.3.3: New USB device strings: Mfr=3, Product=4, SerialNumber=0
[ 4.943001] usb 1-1.3.3.3: Product: Razer BlackShark V2 Pro
[ 4.943016] usb 1-1.3.3.3: Manufacturer: Razer
[ 4.947388] bcm2835_audio bcm2835_audio: card created with 8 channels
[ 4.955283] usb 1-1.4.4.3: new full-speed USB device number 16 using xhci_hcd
[ 5.095429] usb 1-1.4.4.3: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=88.91
[ 5.095469] usb 1-1.4.4.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.129299] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.157774] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.189812] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.211840] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.213831] Bluetooth: Core ver 2.22
[ 5.214853] NET: Registered PF_BLUETOOTH protocol family
[ 5.214878] Bluetooth: HCI device and connection manager initialized
[ 5.214920] Bluetooth: HCI socket layer initialized
[ 5.214941] Bluetooth: L2CAP socket layer initialized
[ 5.214988] Bluetooth: SCO socket layer initialized
[ 5.239978] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
[ 5.245627] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
[ 5.246364] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
[ 5.247267] brcmstb-i2c fef04500.i2c: @97500hz registered in polling mode
[ 5.261701] brcmstb-i2c fef09500.i2c: @97500hz registered in polling mode
[ 5.263752] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
[ 5.263806] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[ 5.263883] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[ 5.263904] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[ 5.263921] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[ 5.290502] usb 1-1.3.3.3: Not enough bandwidth for new device state.
[ 5.290560] usb 1-1.3.3.3: Not enough bandwidth for altsetting 2
[ 5.291766] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20
[ 5.293195] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21
[ 5.293865] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22
[ 5.294356] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23
[ 5.294390] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[ 5.294412] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[ 5.294429] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[ 5.294445] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[ 5.295408] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
[ 5.342510] Bluetooth: hci0: unexpected event for opcode 0x0000
[ 5.354283] usbcore: registered new interface driver btusb
[ 5.363606] Bluetooth: hci3: unexpected event for opcode 0x0c03
[ 5.365465] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[ 5.365522] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[ 5.367355] Bluetooth: hci3: unexpected event for opcode 0x1001
[ 5.371000] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[ 5.371071] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[ 5.376510] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[ 5.376599] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[ 5.385217] bcm2835-codec bcm2835-codec: Device registered as /dev/video18
[ 5.385278] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx
[ 5.397647] bcm2835-codec bcm2835-codec: Device registered as /dev/video31
[ 5.397707] bcm2835-codec bcm2835-codec: Loaded V4L2 encode_image
[ 5.411762] usb 1-1.3.2: Not enough bandwidth for new device state.
[ 5.411816] usb 1-1.3.2: Not enough bandwidth for altsetting 1
[ 5.436407] usb 1-1.3.2: Not enough bandwidth for new device state.
[ 5.436457] usb 1-1.3.2: Not enough bandwidth for altsetting 1
[ 5.449356] usb 1-1.3.2: Not enough bandwidth for new device state.
[ 5.449415] usb 1-1.3.2: Not enough bandwidth for altsetting 2
[ 5.463627] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4])
[ 5.466237] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0
[ 5.478986] input: Razer Razer BlackShark V2 Pro Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.3/1-1.3.3.3/1-1.3.3.3:1.3/0003:1532:0528.0004/input/input9
[ 5.550995] Registered IR keymap rc-cec
[ 5.573896] input: Razer Razer BlackShark V2 Pro as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.3/1-1.3.3.3/1-1.3.3.3:1.3/0003:1532:0528.0004/input/input10
[ 5.583625] usb 1-1.3.3.2: Not enough bandwidth for new device state.
[ 5.583685] usb 1-1.3.3.2: Not enough bandwidth for altsetting 1
[ 5.589449] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0
[ 5.592426] usb 1-1.3.3.2: Not enough bandwidth for new device state.
[ 5.592482] usb 1-1.3.3.2: Not enough bandwidth for altsetting 1
[ 5.596564] usb 1-1.3.3.2: Not enough bandwidth for new device state.
[ 5.596636] usb 1-1.3.3.2: Not enough bandwidth for altsetting 2
[ 5.614119] input: Razer Razer BlackShark V2 Pro as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.3/1-1.3.3.3/1-1.3.3.3:1.3/0003:1532:0528.0004/input/input11
[ 5.638406] hid-generic 0003:1532:0528.0004: input,hiddev99,hidraw3: USB HID v1.11 Device [Razer Razer BlackShark V2 Pro] on usb-0000:01:00.0-1.3.3.3/input3
[ 5.676414] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input12
[ 5.718979] usbcore: registered new interface driver snd-usb-audio
[ 5.798970] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 5.826468] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 5.858454] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
[ 5.875418] usb 1-1.3.3.4: new high-speed USB device number 17 using xhci_hcd
[ 5.993647] usb 1-1.3.3.4: New USB device found, idVendor=2109, idProduct=2813, bcdDevice=90.14
[ 5.993689] usb 1-1.3.3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.993707] usb 1-1.3.3.4: Product: USB2.0 Hub
[ 5.993721] usb 1-1.3.3.4: Manufacturer: VIA Labs, Inc.
[ 5.998299] vc4-drm gpu: bound fef00700.hdmi (ops vc4_hdmi_ops [vc4])
[ 6.015598] Registered IR keymap rc-cec
[ 6.032357] rc rc1: vc4 as /devices/platform/soc/fef05700.hdmi/rc/rc1
[ 6.074579] input: vc4 as /devices/platform/soc/fef05700.hdmi/rc/rc1/input13
[ 6.087093] hub 1-1.3.3.4:1.0: USB hub found
[ 6.087369] hub 1-1.3.3.4:1.0: 4 ports detected
[ 6.215138] vc4-drm gpu: bound fef05700.hdmi (ops vc4_hdmi_ops [vc4])
[ 6.215703] vc4-drm gpu: bound fe004000.txp (ops vc4_txp_ops [vc4])
[ 6.216075] vc4-drm gpu: bound fe206000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 6.216430] vc4-drm gpu: bound fe207000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 6.216760] vc4-drm gpu: bound fe20a000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 6.217036] vc4-drm gpu: bound fe216000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 6.217364] vc4-drm gpu: bound fec12000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 6.232992] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 1
[ 6.233819] vc4-drm gpu: [drm] Cannot find any crtc or sizes
[ 6.241014] brcmfmac: F1 signature read @0x18000000=0x15264345
[ 6.315462] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 6.318265] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.bin failed with error -2
[ 6.391618] usbcore: registered new interface driver brcmfmac
[ 6.431369] usb 1-1.3.3.4.2: new full-speed USB device number 18 using xhci_hcd
[ 6.578544] usb 1-1.3.3.4.2: New USB device found, idVendor=1532, idProduct=0528, bcdDevice= 1.00
[ 6.578583] usb 1-1.3.3.4.2: New USB device strings: Mfr=3, Product=4, SerialNumber=0
[ 6.578600] usb 1-1.3.3.4.2: Product: Razer BlackShark V2 Pro
[ 6.578614] usb 1-1.3.3.4.2: Manufacturer: Razer
[ 6.595306] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 6.595505] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 6.601950] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Nov 1 2021 00:37:25 version 7.45.241 (1a2f2fa CY) FWID 01-703fd60
[ 6.729106] usb 1-1.3.3.4.2: Not enough bandwidth for new device state.
[ 6.729180] usb 1-1.3.3.4.2: Not enough bandwidth for altsetting 1
[ 6.737448] usb 1-1.3.3.4.2: Not enough bandwidth for new device state.
[ 6.737501] usb 1-1.3.3.4.2: Not enough bandwidth for altsetting 1
[ 6.741443] usb 1-1.3.3.4.2: Not enough bandwidth for new device state.
[ 6.741515] usb 1-1.3.3.4.2: Not enough bandwidth for altsetting 2
[ 7.065696] input: Razer Razer BlackShark V2 Pro Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.3/1-1.3.3.4/1-1.3.3.4.2/1-1.3.3.4.2:1.3/0003:1532:0528.0005/input/input14
[ 7.196481] input: Razer Razer BlackShark V2 Pro as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.3/1-1.3.3.4/1-1.3.3.4.2/1-1.3.3.4.2:1.3/0003:1532:0528.0005/input/input15
[ 7.232146] input: Razer Razer BlackShark V2 Pro as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.3/1-1.3.3.4/1-1.3.3.4.2/1-1.3.3.4.2:1.3/0003:1532:0528.0005/input/input16
[ 7.255583] hid-generic 0003:1532:0528.0005: input,hiddev100,hidraw4: USB HID v1.11 Device [Razer Razer BlackShark V2 Pro] on usb-0000:01:00.0-1.3.3.4.2/input3
[ 7.367300] usb 1-1.3.3.4.3: new full-speed USB device number 19 using xhci_hcd
[ 7.395291] Bluetooth: hci5: command 0x1001 tx timeout
[ 7.395343] Bluetooth: hci4: command 0x1001 tx timeout
[ 7.424278] rpivid_hevc: module is from the staging directory, the quality is unknown, you have been warned.
[ 7.429319] rpivid feb10000.codec: Device registered as /dev/video19
[ 7.522705] usb 1-1.3.3.4.3: New USB device found, idVendor=1532, idProduct=0528, bcdDevice= 1.00
[ 7.522747] usb 1-1.3.3.4.3: New USB device strings: Mfr=3, Product=4, SerialNumber=0
[ 7.522765] usb 1-1.3.3.4.3: Product: Razer BlackShark V2 Pro
[ 7.522779] usb 1-1.3.3.4.3: Manufacturer: Razer
[ 7.560417] snd-usb-audio 1-1.3.3.4.3:1.0: cannot find the slot for index -1 (range 0-7), error: -19
[ 7.560470] usb 1-1.3.3.4.3: cannot create card instance 5
[ 7.625792] input: Razer Razer BlackShark V2 Pro Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.3/1-1.3.3.4/1-1.3.3.4.3/1-1.3.3.4.3:1.3/0003:1532:0528.0006/input/input17
[ 7.683968] input: Razer Razer BlackShark V2 Pro as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.3/1-1.3.3.4/1-1.3.3.4.3/1-1.3.3.4.3:1.3/0003:1532:0528.0006/input/input18
[ 7.690273] input: Razer Razer BlackShark V2 Pro as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.3/1-1.3.3.4/1-1.3.3.4.3/1-1.3.3.4.3:1.3/0003:1532:0528.0006/input/input19
[ 7.718536] hid-generic 0003:1532:0528.0006: input,hiddev101,hidraw5: USB HID v1.11 Device [Razer Razer BlackShark V2 Pro] on usb-0000:01:00.0-1.3.3.4.3/input3
[ 7.765213] uart-pl011 fe201000.serial: no DMA platform data
[ 7.937792] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS
[ 9.560041] 8021q: 802.1Q VLAN Support v1.8
[ 9.785355] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
[ 9.786406] bcmgenet fd580000.ethernet eth0: Link is Down
[ 13.859537] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[ 13.859621] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 15.341437] Bluetooth: HCI UART driver ver 2.3
[ 15.341459] Bluetooth: HCI UART protocol H4 registered
[ 15.341528] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 15.341687] Bluetooth: HCI UART protocol Broadcom registered
[ 16.355364] vc4-drm gpu: [drm] Cannot find any crtc or sizes
[ 23.843488] usb 1-1.3.3.2: reset full-speed USB device number 12 using xhci_hcd
[ 24.275488] usb 1-1.3.3.2: reset full-speed USB device number 12 using xhci_hcd
[ 25.810170] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 25.810190] Bluetooth: BNEP filters: protocol multicast
[ 25.810204] Bluetooth: BNEP socket layer initialized
[ 25.826364] NET: Registered PF_ALG protocol family
[ 31.715289] cam-dummy-reg: disabling
[ 32.751480] usb 1-1.3.3.4.2: reset full-speed USB device number 18 using xhci_hcd
[ 33.175472] usb 1-1.3.3.4.2: reset full-speed USB device number 18 using xhci_hcd
[ 33.844566] Bluetooth: hci5: unexpected event for opcode 0x0c03
[ 33.846594] Bluetooth: hci5: unexpected event for opcode 0x1003
[ 34.015496] usb 1-1.3.3.3: reset full-speed USB device number 15 using xhci_hcd
[ 34.467500] usb 1-1.3.3.3: reset full-speed USB device number 15 using xhci_hcd
[ 37.367496] usb 1-1.3.1: reset full-speed USB device number 5 using xhci_hcd
[ 37.795656] usb 1-1.3.1: reset full-speed USB device number 5 using xhci_hcd
[ 38.957569] Bluetooth: hci1: urb 00000000470da097 failed to resubmit (2)
[ 39.163490] usb 1-1.3.2: reset full-speed USB device number 7 using xhci_hcd
[ 39.595478] usb 1-1.3.2: reset full-speed USB device number 7 using xhci_hcd
[ 41.119486] usb 1-1.3.3.4.3: reset full-speed USB device number 19 using xhci_hcd
[ 41.539472] usb 1-1.3.3.4.3: reset full-speed USB device number 19 using xhci_hcd
pi@raspberrypi:~ $ dmesg
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
[ 0.000000] Linux version 5.15.74-v8+ (dom@buildbot) (aarch64-linux-gnu-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1595 SMP PREEMPT Wed Oct 26 11:07:24 BST 2022
[ 0.000000] random: crng init done
[ 0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.5
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x000000001ac00000, size 320 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff]
[ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000fbffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff]
[ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff]
[ 0.000000] On node 0, zone DMA32: 19456 pages in unavailable ranges
[ 0.000000] On node 0, zone DMA32: 16384 pages in unavailable ranges
[ 0.000000] percpu: Embedded 28 pages/cpu s77336 r8192 d29160 u114688
[ 0.000000] pcpu-alloc: s77336 r8192 d29160 u114688 alloc=28*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: detected: Spectre-v2
[ 0.000000] CPU features: detected: Spectre-v3a
[ 0.000000] CPU features: detected: Spectre-v4
[ 0.000000] CPU features: detected: Spectre-BHB
[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 996912
[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=E4:5F:01:B2:6A:18 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=2bc00b1f-02 rootfstype=ext4 fsck.repair=yes rootwait
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: mapped [mem 0x0000000037400000-0x000000003b400000] (64MB)
[ 0.000000] Memory: 3553908K/4050944K available (11520K kernel code, 1956K rwdata, 4148K rodata, 3840K init, 975K bss, 169356K reserved, 327680K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 38048 entries in 149 pages
[ 0.000000] ftrace: allocated 149 pages with 4 groups
[ 0.000000] trace event string verifier disabled
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7ef00100, parent irq: 10)
[ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[ 0.000001] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[ 0.000330] Console: colour dummy device 80x25
[ 0.000905] printk: console [tty1] enabled
[ 0.000975] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
[ 0.001015] pid_max: default: 32768 minimum: 301
[ 0.001167] LSM: Security Framework initializing
[ 0.001399] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.001481] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.002763] cgroup: Disabling memory control group subsystem
[ 0.005620] rcu: Hierarchical SRCU implementation.
[ 0.006738] EFI services will not be available.
[ 0.007274] smp: Bringing up secondary CPUs ...
[ 0.008456] Detected PIPT I-cache on CPU1
[ 0.008534] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
[ 0.009715] Detected PIPT I-cache on CPU2
[ 0.009766] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
[ 0.010925] Detected PIPT I-cache on CPU3
[ 0.010975] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
[ 0.011124] smp: Brought up 1 node, 4 CPUs
[ 0.011214] SMP: Total of 4 processors activated.
[ 0.011235] CPU features: detected: 32-bit EL0 Support
[ 0.011253] CPU features: detected: 32-bit EL1 Support
[ 0.011274] CPU features: detected: CRC32 instructions
[ 0.044178] CPU: All CPU(s) started at EL2
[ 0.044277] alternatives: patching kernel code
[ 0.045879] devtmpfs: initialized
[ 0.057219] Enabled cp15_barrier support
[ 0.057286] Enabled setend support
[ 0.057324] KASLR enabled
[ 0.057503] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.057551] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.066534] pinctrl core: initialized pinctrl subsystem
[ 0.067363] DMI not present or invalid.
[ 0.068066] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.071803] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.072120] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.073132] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.073244] audit: initializing netlink subsys (disabled)
[ 0.073541] audit: type=2000 audit(0.072:1): state=initialized audit_enabled=0 res=1
[ 0.074083] thermal_sys: Registered thermal governor 'step_wise'
[ 0.074304] cpuidle: using governor menu
[ 0.074613] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.074819] ASID allocator initialised with 32768 entries
[ 0.075001] Serial: AMBA PL011 UART driver
[ 0.088296] bcm2835-mbox fe00b880.mailbox: mailbox enabled
[ 0.112528] raspberrypi-firmware soc:firmware: Attached to firmware from 2022-10-26T11:09:05, variant start
[ 0.116518] raspberrypi-firmware soc:firmware: Firmware hash is c72ad6b26ff40c91ef776b847436094ee63fabee
[ 0.167497] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1
[ 0.171880] vgaarb: loaded
[ 0.172301] SCSI subsystem initialized
[ 0.172529] usbcore: registered new interface driver usbfs
[ 0.172596] usbcore: registered new interface driver hub
[ 0.172674] usbcore: registered new device driver usb
[ 0.173196] usb_phy_generic phy: supply vcc not found, using dummy regulator
[ 0.173407] usb_phy_generic phy: dummy supplies not allowed for exclusive requests
[ 0.173714] pps_core: LinuxPPS API ver. 1 registered
[ 0.173738] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti [at] linux.it>
[ 0.173774] PTP clock support registered
[ 0.175225] clocksource: Switched to clocksource arch_sys_counter
[ 0.263773] VFS: Disk quotas dquot_6.6.0
[ 0.263903] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.264114] FS-Cache: Loaded
[ 0.264362] CacheFiles: Loaded
[ 0.274886] NET: Registered PF_INET protocol family
[ 0.275459] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.278908] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.278984] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.279023] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.279312] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[ 0.279853] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.280109] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.280201] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.280533] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.281535] RPC: Registered named UNIX socket transport module.
[ 0.281569] RPC: Registered udp transport module.
[ 0.281588] RPC: Registered tcp transport module.
[ 0.281608] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.281638] PCI: CLS 0 bytes, default 64
[ 0.284196] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 0.284547] kvm [1]: IPA Size Limit: 44 bits
[ 0.285732] kvm [1]: vgic interrupt IRQ9
[ 0.286012] kvm [1]: Hyp mode initialized successfully
[ 1.162776] Initialise system trusted keyrings
[ 1.163167] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[ 1.169916] zbud: loaded
[ 1.171789] FS-Cache: Netfs 'nfs' registered for caching
[ 1.172490] NFS: Registering the id_resolver key type
[ 1.172539] Key type id_resolver registered
[ 1.172559] Key type id_legacy registered
[ 1.172674] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.172700] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 1.173936] Key type asymmetric registered
[ 1.173965] Asymmetric key parser 'x509' registered
[ 1.174056] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 1.174328] io scheduler mq-deadline registered
[ 1.174355] io scheduler kyber registered
[ 1.182861] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[ 1.182926] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
[ 1.183027] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000
[ 1.183122] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00ffffffff -> 0x0400000000
[ 1.249323] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
[ 1.249693] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[ 1.249725] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.249751] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff])
[ 1.249853] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[ 1.250117] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 1.253880] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 1.254263] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
[ 1.254399] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 1.254841] pci 0000:01:00.0: PME# supported from D0 D3hot
[ 1.258680] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 1.258738] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
[ 1.258771] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
[ 1.258823] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 1.258854] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
[ 1.271035] iproc-rng200 fe104000.rng: hwrng registered
[ 1.271583] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[ 1.273078] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
[ 1.285505] brd: module loaded
[ 1.295002] loop: module loaded
[ 1.295845] Loading iSCSI transport class v2.0-870.
[ 1.300835] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
[ 1.359388] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
[ 1.360512] usbcore: registered new interface driver r8152
[ 1.360590] usbcore: registered new interface driver lan78xx
[ 1.360655] usbcore: registered new interface driver smsc95xx
[ 1.408126] pci 0000:00:00.0: enabling device (0000 -> 0002)
[ 1.408332] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 1.408375] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[ 1.409134] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x00003c0000000890
[ 1.410162] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 1.410196] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[ 1.410231] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[ 1.410674] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[ 1.410710] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.410736] usb usb1: Product: xHCI Host Controller
[ 1.410758] usb usb1: Manufacturer: Linux 5.15.74-v8+ xhci-hcd
[ 1.410780] usb usb1: SerialNumber: 0000:01:00.0
[ 1.411571] hub 1-0:1.0: USB hub found
[ 1.411661] hub 1-0:1.0: 1 port detected
[ 1.412597] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
[ 1.412634] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.412660] usb usb2: Product: xHCI Host Controller
[ 1.412682] usb usb2: Manufacturer: Linux 5.15.74-v8+ xhci-hcd
[ 1.412703] usb usb2: SerialNumber: 0000:01:00.0
[ 1.413368] hub 2-0:1.0: USB hub found
[ 1.413474] hub 2-0:1.0: 4 ports detected
[ 1.415239] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 1.415578] dwc_otg: FIQ enabled
[ 1.415589] dwc_otg: NAK holdoff enabled
[ 1.415598] dwc_otg: FIQ split-transaction FSM enabled
[ 1.415611] Module dwc_common_port init
[ 1.416156] usbcore: registered new interface driver uas
[ 1.416286] usbcore: registered new interface driver usb-storage
[ 1.416506] mousedev: PS/2 mouse device common for all mice
[ 1.422293] sdhci: Secure Digital Host Controller Interface driver
[ 1.422333] sdhci: Copyright(c) Pierre Ossman
[ 1.422992] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.426659] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.427287] hid: raw HID events driver (C) Jiri Kosina
[ 1.427477] usbcore: registered new interface driver usbhid
[ 1.427502] usbhid: USB HID core driver
[ 1.427827] ashmem: initialized
[ 1.436479] NET: Registered PF_PACKET protocol family
[ 1.436632] Key type dns_resolver registered
[ 1.438170] registered taskstats version 1
[ 1.438224] Loading compiled-in X.509 certificates
[ 1.438909] Key type ._fscrypt registered
[ 1.438935] Key type .fscrypt registered
[ 1.438953] Key type fscrypt-provisioning registered
[ 1.450741] uart-pl011 fe201000.serial: there is not valid maps for state default
[ 1.451076] uart-pl011 fe201000.serial: cts_event_workaround enabled
[ 1.451302] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 19, base_baud = 0) is a PL011 rev2
[ 1.460410] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 1.460912] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ 1.462124] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
[ 1.462157] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
[ 1.493915] of_cfs_init
[ 1.494108] of_cfs_init: OK
[ 1.526634] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA
[ 1.527019] Waiting for root device PARTUUID=2bc00b1f-02...
[ 1.599634] mmc1: new high speed SDIO card at address 0001
[ 1.629768] mmc0: new ultra high speed DDR50 SDHC card at address aaaa
[ 1.630763] mmcblk0: mmc0:aaaa SE32G 29.7 GiB
[ 1.634176] mmcblk0: p1 p2
[ 1.634748] mmcblk0: mmc0:aaaa SE32G 29.7 GiB
[ 1.645835] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 1.645961] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 1.651102] devtmpfs: mounted
[ 1.659416] Freeing unused kernel memory: 3840K
[ 1.659649] Run /sbin/init as init process
[ 1.659670] with arguments:
[ 1.659679] /sbin/init
[ 1.659689] with environment:
[ 1.659698] HOME=/
[ 1.659707] TERM=linux
[ 1.667265] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 1.817889] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
[ 1.817954] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.817980] usb 1-1: Product: USB2.0 Hub
[ 1.820111] hub 1-1:1.0: USB hub found
[ 1.820417] hub 1-1:1.0: 4 ports detected
[ 1.983003] systemd[1]: System time before build time, advancing clock.
[ 2.123298] usb 1-1.3: new high-speed USB device number 3 using xhci_hcd
[ 2.163557] NET: Registered PF_INET6 protocol family
[ 2.165479] Segment Routing with IPv6
[ 2.165540] In-situ OAM (IOAM) with IPv6
[ 2.227907] systemd[1]: systemd 247.3-7+deb11u1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[ 2.228944] systemd[1]: Detected architecture arm64.
[ 2.229642] usb 1-1.3: New USB device found, idVendor=2109, idProduct=2813, bcdDevice=90.14
[ 2.229683] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.229711] usb 1-1.3: Product: USB2.0 Hub
[ 2.229733] usb 1-1.3: Manufacturer: VIA Labs, Inc.
[ 2.231537] hub 1-1.3:1.0: USB hub found
[ 2.232308] hub 1-1.3:1.0: 4 ports detected
[ 2.239940] systemd[1]: Set hostname to <raspberrypi>.
[ 2.327353] usb 1-1.4: new high-speed USB device number 4 using xhci_hcd
[ 2.430005] usb 1-1.4: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=92.24
[ 2.430068] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.430097] usb 1-1.4: Product: USB2.0 Hub
[ 2.430120] usb 1-1.4: Manufacturer: GenesysLogic
[ 2.432116] hub 1-1.4:1.0: USB hub found
[ 2.432527] hub 1-1.4:1.0: 4 ports detected
[ 2.567268] usb 1-1.3.1: new full-speed USB device number 5 using xhci_hcd
[ 2.721075] usb 1-1.3.1: New USB device found, idVendor=1532, idProduct=0528, bcdDevice= 1.00
[ 2.721137] usb 1-1.3.1: New USB device strings: Mfr=3, Product=4, SerialNumber=0
[ 2.721165] usb 1-1.3.1: Product: Razer BlackShark V2 Pro
[ 2.721189] usb 1-1.3.1: Manufacturer: Razer
[ 2.771264] usb 1-1.4.1: new full-speed USB device number 6 using xhci_hcd
[ 2.776456] input: Razer Razer BlackShark V2 Pro Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.1/1-1.3.1:1.3/0003:1532:0528.0001/input/input0
[ 2.835732] input: Razer Razer BlackShark V2 Pro as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.1/1-1.3.1:1.3/0003:1532:0528.0001/input/input1
[ 2.836067] input: Razer Razer BlackShark V2 Pro as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.1/1-1.3.1:1.3/0003:1532:0528.0001/input/input2
[ 2.836667] hid-generic 0003:1532:0528.0001: input,hiddev96,hidraw0: USB HID v1.11 Device [Razer Razer BlackShark V2 Pro] on usb-0000:01:00.0-1.3.1/input3
[ 2.890301] systemd[1]: Queued start job for default target Multi-User System.
[ 2.896193] systemd[1]: Created slice system-getty.slice.
[ 2.897945] systemd[1]: Created slice system-modprobe.slice.
[ 2.899312] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 2.900457] systemd[1]: Created slice User and Session Slice.
[ 2.901248] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 2.901985] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 2.903406] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 2.903962] systemd[1]: Reached target Local Encrypted Volumes.
[ 2.904445] systemd[1]: Reached target Paths.
[ 2.904876] systemd[1]: Reached target Slices.
[ 2.905283] systemd[1]: Reached target Swap.
[ 2.906566] systemd[1]: Listening on Syslog Socket.
[ 2.907706] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 2.908404] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 2.909761] usb 1-1.4.1: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=88.91
[ 2.909804] usb 1-1.4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.909923] systemd[1]: Listening on Journal Audit Socket.
[ 2.911037] systemd[1]: Listening on Journal Socket (/dev/log).
[ 2.912470] systemd[1]: Listening on Journal Socket.
[ 2.916273] systemd[1]: Listening on udev Control Socket.
[ 2.917441] systemd[1]: Listening on udev Kernel Socket.
[ 2.918692] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
[ 2.922802] systemd[1]: Mounting POSIX Message Queue File System...
[ 2.927826] systemd[1]: Mounting RPC Pipe File System...
[ 2.933485] systemd[1]: Mounting Kernel Debug File System...
[ 2.939031] systemd[1]: Mounting Kernel Trace File System...
[ 2.940050] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
[ 2.948043] systemd[1]: Starting Restore / save the current clock...
[ 2.959107] systemd[1]: Starting Set the console keyboard layout...
[ 2.965040] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 2.970987] systemd[1]: Starting Load Kernel Module configfs...
[ 2.977238] systemd[1]: Starting Load Kernel Module drm...
[ 2.983910] systemd[1]: Starting Load Kernel Module fuse...
[ 2.992303] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 2.995303] usb 1-1.3.2: new full-speed USB device number 7 using xhci_hcd
[ 2.999335] systemd[1]: Starting File System Check on Root Device...
[ 3.013655] systemd[1]: Starting Journal Service...
[ 3.022863] systemd[1]: Starting Load Kernel Modules...
[ 3.028582] systemd[1]: Starting Coldplug All udev Devices...
[ 3.041980] systemd[1]: Mounted POSIX Message Queue File System.
[ 3.043652] systemd[1]: Mounted RPC Pipe File System.
[ 3.045062] systemd[1]: Mounted Kernel Debug File System.
[ 3.046673] systemd[1]: Mounted Kernel Trace File System.
[ 3.049753] systemd[1]: Finished Restore / save the current clock.
[ 3.053263] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 3.056289] systemd[1]: modprobe [at] configfs.service: Succeeded.
[ 3.057838] systemd[1]: Finished Load Kernel Module configfs.
[ 3.064616] systemd[1]: Mounting Kernel Configuration File System...
[ 3.080095] fuse: init (API version 7.34)
[ 3.088476] systemd[1]: Started File System Check Daemon to report status.
[ 3.101027] systemd[1]: modprobe [at] fuse.service: Succeeded.
[ 3.102599] systemd[1]: Finished Load Kernel Module fuse.
[ 3.107461] systemd[1]: Finished Load Kernel Modules.
[ 3.117282] systemd[1]: Mounted Kernel Configuration File System.
[ 3.125906] systemd[1]: Mounting FUSE Control File System...
[ 3.138230] systemd[1]: Starting Apply Kernel Variables...
[ 3.153514] systemd[1]: Mounted FUSE Control File System.
[ 3.184804] usb 1-1.3.2: New USB device found, idVendor=1532, idProduct=0528, bcdDevice= 1.00
[ 3.184874] usb 1-1.3.2: New USB device strings: Mfr=3, Product=4, SerialNumber=0
[ 3.184906] usb 1-1.3.2: Product: Razer BlackShark V2 Pro
[ 3.184931] usb 1-1.3.2: Manufacturer: Razer
[ 3.191986] systemd[1]: modprobe [at] drm.service: Succeeded.
[ 3.193403] systemd[1]: Finished Load Kernel Module drm.
[ 3.199292] usb 1-1.4.2: new full-speed USB device number 8 using xhci_hcd
[ 3.241609] systemd[1]: Finished Apply Kernel Variables.
[ 3.261574] systemd[1]: Finished File System Check on Root Device.
[ 3.270841] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 3.272441] input: Razer Razer BlackShark V2 Pro Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.2/1-1.3.2:1.3/0003:1532:0528.0002/input/input3
[ 3.331926] input: Razer Razer BlackShark V2 Pro as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.2/1-1.3.2:1.3/0003:1532:0528.0002/input/input4
[ 3.332369] input: Razer Razer BlackShark V2 Pro as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.2/1-1.3.2:1.3/0003:1532:0528.0002/input/input5
[ 3.333003] hid-generic 0003:1532:0528.0002: input,hiddev97,hidraw1: USB HID v1.11 Device [Razer Razer BlackShark V2 Pro] on usb-0000:01:00.0-1.3.2/input3
[ 3.341832] usb 1-1.4.2: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=88.91
[ 3.341868] usb 1-1.4.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.427285] usb 1-1.3.3: new high-speed USB device number 9 using xhci_hcd
[ 3.428447] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null). Quota mode: none.
[ 3.438226] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 3.443083] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 3.443505] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 3.448812] systemd[1]: Starting Load/Save Random Seed...
[ 3.453832] systemd[1]: Starting Create System Users...
[ 3.455296] systemd[1]: Started Journal Service.
[ 3.530626] systemd-journald[140]: Received client request to flush runtime journal.
[ 3.539496] systemd-journald[140]: File /var/log/journal/8b79f42633cd4454a621ec53b2c7f6af/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 3.551922] usb 1-1.3.3: New USB device found, idVendor=2109, idProduct=2813, bcdDevice=90.14
[ 3.551970] usb 1-1.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.551987] usb 1-1.3.3: Product: USB2.0 Hub
[ 3.552002] usb 1-1.3.3: Manufacturer: VIA Labs, Inc.
[ 3.561641] hub 1-1.3.3:1.0: USB hub found
[ 3.564694] hub 1-1.3.3:1.0: 4 ports detected
[ 3.619310] usb 1-1.4.3: new full-speed USB device number 10 using xhci_hcd
[ 3.759126] usb 1-1.4.3: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=88.91
[ 3.759166] usb 1-1.4.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.843323] usb 1-1.4.4: new high-speed USB device number 11 using xhci_hcd
[ 3.954762] usb 1-1.4.4: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=92.24
[ 3.954801] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.954817] usb 1-1.4.4: Product: USB2.0 Hub
[ 3.954830] usb 1-1.4.4: Manufacturer: GenesysLogic
[ 3.957067] hub 1-1.4.4:1.0: USB hub found
[ 3.957461] hub 1-1.4.4:1.0: 4 ports detected
[ 4.047283] usb 1-1.3.3.2: new full-speed USB device number 12 using xhci_hcd
[ 4.207121] usb 1-1.3.3.2: New USB device found, idVendor=1532, idProduct=0528, bcdDevice= 1.00
[ 4.207172] usb 1-1.3.3.2: New USB device strings: Mfr=3, Product=4, SerialNumber=0
[ 4.207189] usb 1-1.3.3.2: Product: Razer BlackShark V2 Pro
[ 4.207288] usb 1-1.3.3.2: Manufacturer: Razer
[ 4.247318] usb 1-1.4.4.1: new full-speed USB device number 13 using xhci_hcd
[ 4.325290] input: Razer Razer BlackShark V2 Pro Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.3/1-1.3.3.2/1-1.3.3.2:1.3/0003:1532:0528.0003/input/input6
[ 4.386039] usb 1-1.4.4.1: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=88.91
[ 4.386081] usb 1-1.4.4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.390842] input: Razer Razer BlackShark V2 Pro as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.3/1-1.3.3.2/1-1.3.3.2:1.3/0003:1532:0528.0003/input/input7
[ 4.393298] input: Razer Razer BlackShark V2 Pro as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.3/1-1.3.3.2/1-1.3.3.2:1.3/0003:1532:0528.0003/input/input8
[ 4.423566] hid-generic 0003:1532:0528.0003: input,hiddev98,hidraw2: USB HID v1.11 Device [Razer Razer BlackShark V2 Pro] on usb-0000:01:00.0-1.3.3.2/input3
[ 4.519304] usb 1-1.4.4.2: new full-speed USB device number 14 using xhci_hcd
[ 4.659329] usb 1-1.4.4.2: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=88.91
[ 4.659384] usb 1-1.4.4.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.743316] usb 1-1.3.3.3: new full-speed USB device number 15 using xhci_hcd
[ 4.744904] mc: Linux media interface: v0.10
[ 4.770921] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[ 4.785234] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[ 4.785274] [vc_sm_connected_init]: start
[ 4.786390] [vc_sm_connected_init]: installed successfully
[ 4.872453] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[ 4.879189] videodev: Linux video capture interface: v2.00
[ 4.942942] usb 1-1.3.3.3: New USB device found, idVendor=1532, idProduct=0528, bcdDevice= 1.00
[ 4.942984] usb 1-1.3.3.3: New USB device strings: Mfr=3, Product=4, SerialNumber=0
[ 4.943001] usb 1-1.3.3.3: Product: Razer BlackShark V2 Pro
[ 4.943016] usb 1-1.3.3.3: Manufacturer: Razer
[ 4.947388] bcm2835_audio bcm2835_audio: card created with 8 channels
[ 4.955283] usb 1-1.4.4.3: new full-speed USB device number 16 using xhci_hcd
[ 5.095429] usb 1-1.4.4.3: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=88.91
[ 5.095469] usb 1-1.4.4.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.129299] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.157774] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.189812] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.211840] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.213831] Bluetooth: Core ver 2.22
[ 5.214853] NET: Registered PF_BLUETOOTH protocol family
[ 5.214878] Bluetooth: HCI device and connection manager initialized
[ 5.214920] Bluetooth: HCI socket layer initialized
[ 5.214941] Bluetooth: L2CAP socket layer initialized
[ 5.214988] Bluetooth: SCO socket layer initialized
[ 5.239978] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
[ 5.245627] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
[ 5.246364] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
[ 5.247267] brcmstb-i2c fef04500.i2c: @97500hz registered in polling mode
[ 5.261701] brcmstb-i2c fef09500.i2c: @97500hz registered in polling mode
[ 5.263752] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
[ 5.263806] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[ 5.263883] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[ 5.263904] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[ 5.263921] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[ 5.290502] usb 1-1.3.3.3: Not enough bandwidth for new device state.
[ 5.290560] usb 1-1.3.3.3: Not enough bandwidth for altsetting 2
[ 5.291766] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20
[ 5.293195] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21
[ 5.293865] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22
[ 5.294356] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23
[ 5.294390] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[ 5.294412] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[ 5.294429] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[ 5.294445] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[ 5.295408] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
[ 5.342510] Bluetooth: hci0: unexpected event for opcode 0x0000
[ 5.354283] usbcore: registered new interface driver btusb
[ 5.363606] Bluetooth: hci3: unexpected event for opcode 0x0c03
[ 5.365465] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[ 5.365522] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[ 5.367355] Bluetooth: hci3: unexpected event for opcode 0x1001
[ 5.371000] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[ 5.371071] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[ 5.376510] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[ 5.376599] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[ 5.385217] bcm2835-codec bcm2835-codec: Device registered as /dev/video18
[ 5.385278] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx
[ 5.397647] bcm2835-codec bcm2835-codec: Device registered as /dev/video31
[ 5.397707] bcm2835-codec bcm2835-codec: Loaded V4L2 encode_image
[ 5.411762] usb 1-1.3.2: Not enough bandwidth for new device state.
[ 5.411816] usb 1-1.3.2: Not enough bandwidth for altsetting 1
[ 5.436407] usb 1-1.3.2: Not enough bandwidth for new device state.
[ 5.436457] usb 1-1.3.2: Not enough bandwidth for altsetting 1
[ 5.449356] usb 1-1.3.2: Not enough bandwidth for new device state.
[ 5.449415] usb 1-1.3.2: Not enough bandwidth for altsetting 2
[ 5.463627] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4])
[ 5.466237] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0
[ 5.478986] input: Razer Razer BlackShark V2 Pro Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.3/1-1.3.3.3/1-1.3.3.3:1.3/0003:1532:0528.0004/input/input9
[ 5.550995] Registered IR keymap rc-cec
[ 5.573896] input: Razer Razer BlackShark V2 Pro as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.3/1-1.3.3.3/1-1.3.3.3:1.3/0003:1532:0528.0004/input/input10
[ 5.583625] usb 1-1.3.3.2: Not enough bandwidth for new device state.
[ 5.583685] usb 1-1.3.3.2: Not enough bandwidth for altsetting 1
[ 5.589449] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0
[ 5.592426] usb 1-1.3.3.2: Not enough bandwidth for new device state.
[ 5.592482] usb 1-1.3.3.2: Not enough bandwidth for altsetting 1
[ 5.596564] usb 1-1.3.3.2: Not enough bandwidth for new device state.
[ 5.596636] usb 1-1.3.3.2: Not enough bandwidth for altsetting 2
[ 5.614119] input: Razer Razer BlackShark V2 Pro as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.3/1-1.3.3.3/1-1.3.3.3:1.3/0003:1532:0528.0004/input/input11
[ 5.638406] hid-generic 0003:1532:0528.0004: input,hiddev99,hidraw3: USB HID v1.11 Device [Razer Razer BlackShark V2 Pro] on usb-0000:01:00.0-1.3.3.3/input3
[ 5.676414] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input12
[ 5.718979] usbcore: registered new interface driver snd-usb-audio
[ 5.798970] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 5.826468] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 5.858454] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
[ 5.875418] usb 1-1.3.3.4: new high-speed USB device number 17 using xhci_hcd
[ 5.993647] usb 1-1.3.3.4: New USB device found, idVendor=2109, idProduct=2813, bcdDevice=90.14
[ 5.993689] usb 1-1.3.3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.993707] usb 1-1.3.3.4: Product: USB2.0 Hub
[ 5.993721] usb 1-1.3.3.4: Manufacturer: VIA Labs, Inc.
[ 5.998299] vc4-drm gpu: bound fef00700.hdmi (ops vc4_hdmi_ops [vc4])
[ 6.015598] Registered IR keymap rc-cec
[ 6.032357] rc rc1: vc4 as /devices/platform/soc/fef05700.hdmi/rc/rc1
[ 6.074579] input: vc4 as /devices/platform/soc/fef05700.hdmi/rc/rc1/input13
[ 6.087093] hub 1-1.3.3.4:1.0: USB hub found
[ 6.087369] hub 1-1.3.3.4:1.0: 4 ports detected
[ 6.215138] vc4-drm gpu: bound fef05700.hdmi (ops vc4_hdmi_ops [vc4])
[ 6.215703] vc4-drm gpu: bound fe004000.txp (ops vc4_txp_ops [vc4])
[ 6.216075] vc4-drm gpu: bound fe206000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 6.216430] vc4-drm gpu: bound fe207000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 6.216760] vc4-drm gpu: bound fe20a000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 6.217036] vc4-drm gpu: bound fe216000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 6.217364] vc4-drm gpu: bound fec12000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 6.232992] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 1
[ 6.233819] vc4-drm gpu: [drm] Cannot find any crtc or sizes
[ 6.241014] brcmfmac: F1 signature read @0x18000000=0x15264345
[ 6.315462] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 6.318265] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.bin failed with error -2
[ 6.391618] usbcore: registered new interface driver brcmfmac
[ 6.431369] usb 1-1.3.3.4.2: new full-speed USB device number 18 using xhci_hcd
[ 6.578544] usb 1-1.3.3.4.2: New USB device found, idVendor=1532, idProduct=0528, bcdDevice= 1.00
[ 6.578583] usb 1-1.3.3.4.2: New USB device strings: Mfr=3, Product=4, SerialNumber=0
[ 6.578600] usb 1-1.3.3.4.2: Product: Razer BlackShark V2 Pro
[ 6.578614] usb 1-1.3.3.4.2: Manufacturer: Razer
[ 6.595306] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 6.595505] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 6.601950] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Nov 1 2021 00:37:25 version 7.45.241 (1a2f2fa CY) FWID 01-703fd60
[ 6.729106] usb 1-1.3.3.4.2: Not enough bandwidth for new device state.
[ 6.729180] usb 1-1.3.3.4.2: Not enough bandwidth for altsetting 1
[ 6.737448] usb 1-1.3.3.4.2: Not enough bandwidth for new device state.
[ 6.737501] usb 1-1.3.3.4.2: Not enough bandwidth for altsetting 1
[ 6.741443] usb 1-1.3.3.4.2: Not enough bandwidth for new device state.
[ 6.741515] usb 1-1.3.3.4.2: Not enough bandwidth for altsetting 2
[ 7.065696] input: Razer Razer BlackShark V2 Pro Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.3/1-1.3.3.4/1-1.3.3.4.2/1-1.3.3.4.2:1.3/0003:1532:0528.0005/input/input14
[ 7.196481] input: Razer Razer BlackShark V2 Pro as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.3/1-1.3.3.4/1-1.3.3.4.2/1-1.3.3.4.2:1.3/0003:1532:0528.0005/input/input15
[ 7.232146] input: Razer Razer BlackShark V2 Pro as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.3/1-1.3.3.4/1-1.3.3.4.2/1-1.3.3.4.2:1.3/0003:1532:0528.0005/input/input16
[ 7.255583] hid-generic 0003:1532:0528.0005: input,hiddev100,hidraw4: USB HID v1.11 Device [Razer Razer BlackShark V2 Pro] on usb-0000:01:00.0-1.3.3.4.2/input3
[ 7.367300] usb 1-1.3.3.4.3: new full-speed USB device number 19 using xhci_hcd
[ 7.395291] Bluetooth: hci5: command 0x1001 tx timeout
[ 7.395343] Bluetooth: hci4: command 0x1001 tx timeout
[ 7.424278] rpivid_hevc: module is from the staging directory, the quality is unknown, you have been warned.
[ 7.429319] rpivid feb10000.codec: Device registered as /dev/video19
[ 7.522705] usb 1-1.3.3.4.3: New USB device found, idVendor=1532, idProduct=0528, bcdDevice= 1.00
[ 7.522747] usb 1-1.3.3.4.3: New USB device strings: Mfr=3, Product=4, SerialNumber=0
[ 7.522765] usb 1-1.3.3.4.3: Product: Razer BlackShark V2 Pro
[ 7.522779] usb 1-1.3.3.4.3: Manufacturer: Razer
[ 7.560417] snd-usb-audio 1-1.3.3.4.3:1.0: cannot find the slot for index -1 (range 0-7), error: -19
[ 7.560470] usb 1-1.3.3.4.3: cannot create card instance 5
[ 7.625792] input: Razer Razer BlackShark V2 Pro Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.3/1-1.3.3.4/1-1.3.3.4.3/1-1.3.3.4.3:1.3/0003:1532:0528.0006/input/input17
[ 7.683968] input: Razer Razer BlackShark V2 Pro as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.3/1-1.3.3.4/1-1.3.3.4.3/1-1.3.3.4.3:1.3/0003:1532:0528.0006/input/input18
[ 7.690273] input: Razer Razer BlackShark V2 Pro as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.3/1-1.3.3.4/1-1.3.3.4.3/1-1.3.3.4.3:1.3/0003:1532:0528.0006/input/input19
[ 7.718536] hid-generic 0003:1532:0528.0006: input,hiddev101,hidraw5: USB HID v1.11 Device [Razer Razer BlackShark V2 Pro] on usb-0000:01:00.0-1.3.3.4.3/input3
[ 7.765213] uart-pl011 fe201000.serial: no DMA platform data
[ 7.937792] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS
[ 9.560041] 8021q: 802.1Q VLAN Support v1.8
[ 9.785355] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
[ 9.786406] bcmgenet fd580000.ethernet eth0: Link is Down
[ 13.859537] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[ 13.859621] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 15.341437] Bluetooth: HCI UART driver ver 2.3
[ 15.341459] Bluetooth: HCI UART protocol H4 registered
[ 15.341528] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 15.341687] Bluetooth: HCI UART protocol Broadcom registered
[ 16.355364] vc4-drm gpu: [drm] Cannot find any crtc or sizes
[ 23.843488] usb 1-1.3.3.2: reset full-speed USB device number 12 using xhci_hcd
[ 24.275488] usb 1-1.3.3.2: reset full-speed USB device number 12 using xhci_hcd
[ 25.810170] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 25.810190] Bluetooth: BNEP filters: protocol multicast
[ 25.810204] Bluetooth: BNEP socket layer initialized
[ 25.826364] NET: Registered PF_ALG protocol family
[ 31.715289] cam-dummy-reg: disabling
[ 32.751480] usb 1-1.3.3.4.2: reset full-speed USB device number 18 using xhci_hcd
[ 33.175472] usb 1-1.3.3.4.2: reset full-speed USB device number 18 using xhci_hcd
[ 33.844566] Bluetooth: hci5: unexpected event for opcode 0x0c03
[ 33.846594] Bluetooth: hci5: unexpected event for opcode 0x1003
[ 34.015496] usb 1-1.3.3.3: reset full-speed USB device number 15 using xhci_hcd
[ 34.467500] usb 1-1.3.3.3: reset full-speed USB device number 15 using xhci_hcd
[ 37.367496] usb 1-1.3.1: reset full-speed USB device number 5 using xhci_hcd
[ 37.795656] usb 1-1.3.1: reset full-speed USB device number 5 using xhci_hcd
[ 38.957569] Bluetooth: hci1: urb 00000000470da097 failed to resubmit (2)
[ 39.163490] usb 1-1.3.2: reset full-speed USB device number 7 using xhci_hcd
[ 39.595478] usb 1-1.3.2: reset full-speed USB device number 7 using xhci_hcd
[ 41.119486] usb 1-1.3.3.4.3: reset full-speed USB device number 19 using xhci_hcd
[ 41.539472] usb 1-1.3.3.4.3: reset full-speed USB device number 19 using xhci_hcd
Below is the user.log from the Raspberry Pi:
Nov 3 18:38:50 raspberrypi mtp-probe: checking bus 1, device 7: "/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.2"
Nov 3 18:38:50 raspberrypi mtp-probe: bus: 1, device: 7 was not an MTP device
Nov 3 18:38:50 raspberrypi mtp-probe: checking bus 1, device 7: "/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.2"
Nov 3 18:38:50 raspberrypi mtp-probe: bus: 1, device: 7 was not an MTP device
Nov 3 18:38:50 raspberrypi mtp-probe: checking bus 1, device 14: "/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.3/1-1.3.3.3"
Nov 3 18:38:50 raspberrypi mtp-probe: checking bus 1, device 7: "/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.2"
Nov 3 18:38:50 raspberrypi mtp-probe: bus: 1, device: 14 was not an MTP device
Nov 3 18:38:50 raspberrypi mtp-probe: checking bus 1, device 12: "/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.3/1-1.3.3.2"
Nov 3 18:38:50 raspberrypi mtp-probe: bus: 1, device: 7 was not an MTP device
Nov 3 18:38:50 raspberrypi mtp-probe: bus: 1, device: 12 was not an MTP device
Nov 3 18:38:50 raspberrypi mtp-probe: checking bus 1, device 5: "/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.1"
Nov 3 18:38:50 raspberrypi mtp-probe: checking bus 1, device 19: "/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.3/1-1.3.3.4/1-1.3.3.4.3"
Nov 3 18:38:50 raspberrypi mtp-probe: bus: 1, device: 5 was not an MTP device
Nov 3 18:38:50 raspberrypi mtp-probe: bus: 1, device: 19 was not an MTP device
Nov 3 18:38:50 raspberrypi mtp-probe: checking bus 1, device 18: "/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.3/1-1.3.3.4/1-1.3.3.4.2"
Nov 3 18:38:50 raspberrypi mtp-probe: bus: 1, device: 18 was not an MTP device
Nov 3 18:38:50 raspberrypi vhusbdarmpi4[532]: >>> Starting VirtualHere USB Server v4.4.4 (Built: Sep 16 2022, 14:21:51)<<<
Nov 3 18:38:50 raspberrypi vhusbdarmpi4[532]: Using configuration /usr/local/etc/virtualhere/config.ini
Nov 3 18:38:51 raspberrypi mtp-probe: checking bus 1, device 18: "/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.3/1-1.3.3.4/1-1.3.3.4.2"
Nov 3 18:38:51 raspberrypi vhusbdarmpi4[544]: Server licensed to=100000008341c6e0 max_devices=unlimited
Nov 3 18:38:51 raspberrypi vhusbdarmpi4[544]: Using large URB's
Nov 3 18:38:51 raspberrypi vhusbdarmpi4[544]: Listening on all network interfaces at TCP port 7575
Nov 3 18:38:51 raspberrypi vhusbdarmpi4[544]: Found Full speed device [1532:0528] "Razer, Razer BlackShark V2 Pro" at address 11333
Nov 3 18:38:51 raspberrypi mtp-probe: bus: 1, device: 18 was not an MTP device
Nov 3 18:38:51 raspberrypi vhusbdarmpi4[544]: Warning, could not open device product file /sys/bus/usb/devices/1-1.4.4.1/product, error 2 (No such file or directory)
Nov 3 18:38:51 raspberrypi vhusbdarmpi4[544]: Found Full speed device [0a12:0001] "0x0a12, 0x0001" at address 11441
Nov 3 18:38:51 raspberrypi vhusbdarmpi4[544]: Found Full speed device [1532:0528] "Razer, Razer BlackShark V2 Pro" at address 1131
Nov 3 18:38:51 raspberrypi mtp-probe: checking bus 1, device 19: "/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.3/1-1.3.3.4/1-1.3.3.4.3"
Nov 3 18:38:51 raspberrypi mtp-probe: bus: 1, device: 19 was not an MTP device
Nov 3 18:38:51 raspberrypi mtp-probe: checking bus 1, device 12: "/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.3/1-1.3.3.2"
Nov 3 18:38:51 raspberrypi mtp-probe: bus: 1, device: 12 was not an MTP device
Nov 3 18:38:51 raspberrypi mtp-probe: checking bus 1, device 14: "/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.3/1-1.3.3.3"
Nov 3 18:38:51 raspberrypi mtp-probe: bus: 1, device: 14 was not an MTP device
Nov 3 18:38:57 raspberrypi vhusbdarmpi4[544]: Warning, could not open device product file /sys/bus/usb/devices/1-1.4.2/product, error 2 (No such file or directory)
Nov 3 18:38:57 raspberrypi vhusbdarmpi4[544]: Found Full speed device [0a12:0001] "0x0a12, 0x0001" at address 1142
Nov 3 18:38:57 raspberrypi vhusbdarmpi4[544]: Found Full speed device [1532:0528] "Razer, Razer BlackShark V2 Pro" at address 113342
Nov 3 18:38:57 raspberrypi vhusbdarmpi4[544]: Warning, could not open device product file /sys/bus/usb/devices/1-1.4.4.2/product, error 2 (No such file or directory)
Nov 3 18:38:57 raspberrypi vhusbdarmpi4[544]: Found Full speed device [0a12:0001] "0x0a12, 0x0001" at address 11442
Nov 3 18:38:57 raspberrypi vhusbdarmpi4[544]: Found Full speed device [1532:0528] "Razer, Razer BlackShark V2 Pro" at address 11332
Nov 3 18:38:57 raspberrypi vhusbdarmpi4[544]: Found Full speed device [1532:0528] "Razer, Razer BlackShark V2 Pro" at address 1132
Nov 3 18:38:57 raspberrypi vhusbdarmpi4[544]: Warning, could not open device product file /sys/bus/usb/devices/1-1.4.3/product, error 2 (No such file or directory)
Nov 3 18:38:57 raspberrypi vhusbdarmpi4[544]: Found Full speed device [0a12:0001] "0x0a12, 0x0001" at address 1143
Nov 3 18:38:57 raspberrypi vhusbdarmpi4[544]: Warning, could not open device product file /sys/bus/usb/devices/1-1.4.1/product, error 2 (No such file or directory)
Nov 3 18:38:57 raspberrypi vhusbdarmpi4[544]: Found Full speed device [0a12:0001] "0x0a12, 0x0001" at address 1141
Nov 3 18:38:57 raspberrypi vhusbdarmpi4[544]: Found Full speed device [1532:0528] "Razer, Razer BlackShark V2 Pro" at address 113343
Nov 3 18:38:57 raspberrypi vhusbdarmpi4[544]: Warning, could not open device product file /sys/bus/usb/devices/1-1.4.4.3/product, error 2 (No such file or directory)
Nov 3 18:38:57 raspberrypi vhusbdarmpi4[544]: Found Full speed device [0a12:0001] "0x0a12, 0x0001" at address 11443
Nov 3 18:38:57 raspberrypi vhusbdarmpi4[544]: Unmanaging device 1141 [0a12:0001]
Nov 3 18:38:58 raspberrypi vhusbdarmpi4[544]: Warning, could not open device product file /sys//devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4.1/product, error 2 (No such file or directory)
Nov 3 18:38:58 raspberrypi vhusbdarmpi4[544]: Found Full speed device [0a12:0001] "0x0a12, 0x0001" at address 1141
Nov 3 18:38:58 raspberrypi vhusbdarmpi4[544]: Error 13 opening device file '/sys//module/8021q/uevent', Permission denied
Nov 3 18:39:14 raspberrypi vhusbdarmpi4[544]: 10.4.2.103 connected as connection 1 (Standard TCP)
Nov 3 18:39:14 raspberrypi vhusbdarmpi4[544]: Device 11332 [1532:0528] BOUND to connection 1
Nov 3 18:39:14 raspberrypi vhusbdarmpi4[544]: Executed "" for onReset.0a12.0001
Nov 3 18:39:14 raspberrypi vhusbdarmpi4[544]: Device 1143 [0a12:0001] BOUND to connection 1
Nov 3 18:39:15 raspberrypi vhusbdarmpi4[544]: Executed "" for onReset.0a12.0001
Nov 3 18:39:19 raspberrypi vhusbdarmpi4[544]: 10.4.2.105 connected as connection 4 (Standard TCP)
Nov 3 18:39:19 raspberrypi vhusbdarmpi4[544]: Device 113342 [1532:0528] BOUND to connection 4
Nov 3 18:39:19 raspberrypi vhusbdarmpi4[544]: Executed "" for onReset.0a12.0001
Nov 3 18:39:19 raspberrypi vhusbdarmpi4[544]: Device 11442 [0a12:0001] BOUND to connection 4
Nov 3 18:39:31 raspberrypi vhusbdarmpi4[544]: Executed "" for onReset.0a12.0001
Nov 3 18:39:31 raspberrypi vhusbdarmpi4[544]: 10.4.2.104 connected as connection 7 (Standard TCP)
Nov 3 18:39:31 raspberrypi vhusbdarmpi4[544]: Device 11333 [1532:0528] BOUND to connection 7
Nov 3 18:39:31 raspberrypi vhusbdarmpi4[544]: Executed "" for onReset.0a12.0001
Nov 3 18:39:31 raspberrypi vhusbdarmpi4[544]: Device 11441 [0a12:0001] BOUND to connection 7
Nov 3 18:39:32 raspberrypi vhusbdarmpi4[544]: Executed "" for onReset.0a12.0001
Nov 3 18:39:34 raspberrypi vhusbdarmpi4[544]: 10.4.2.101 connected as connection 10 (Standard TCP)
Nov 3 18:39:35 raspberrypi vhusbdarmpi4[544]: Device 1131 [1532:0528] BOUND to connection 10
Nov 3 18:39:35 raspberrypi vhusbdarmpi4[544]: Executed "" for onReset.0a12.0001
Nov 3 18:39:35 raspberrypi vhusbdarmpi4[544]: Device 1141 [0a12:0001] BOUND to connection 10
Nov 3 18:39:35 raspberrypi vhusbdarmpi4[544]: Executed "" for onReset.0a12.0001
Nov 3 18:39:36 raspberrypi vhusbdarmpi4[544]: 10.4.2.102 connected as connection 13 (Standard TCP)
Nov 3 18:39:36 raspberrypi vhusbdarmpi4[544]: Executed "" for onReset.0a12.0001
Nov 3 18:39:36 raspberrypi vhusbdarmpi4[544]: Device 1142 [0a12:0001] BOUND to connection 13
Nov 3 18:39:36 raspberrypi vhusbdarmpi4[544]: Device 1132 [1532:0528] BOUND to connection 13
Nov 3 18:39:40 raspberrypi vhusbdarmpi4[544]: 192.168.11.84 connected as connection 16 (Standard TCP)
Nov 3 18:39:41 raspberrypi vhusbdarmpi4[544]: 10.4.2.106 connected as connection 17 (Standard TCP)
Nov 3 18:39:42 raspberrypi vhusbdarmpi4[544]: Device 113343 [1532:0528] BOUND to connection 17
Nov 3 18:39:42 raspberrypi vhusbdarmpi4[544]: Executed "" for onReset.0a12.0001
Nov 3 18:39:42 raspberrypi vhusbdarmpi4[544]: Device 11443 [0a12:0001] BOUND to connection 17
Nov 3 18:39:42 raspberrypi vhusbdarmpi4[544]: Executed "" for onReset.0a12.0001
Nov 3 18:41:16 raspberrypi vhusbdarmpi4[544]: Device 11441 [0a12:0001] UNBOUND from connection 7
Nov 3 18:41:18 raspberrypi vhusbdarmpi4[544]: Executed "" for onReset.0a12.0001
Nov 3 18:41:18 raspberrypi vhusbdarmpi4[544]: Device 11441 [0a12:0001] BOUND to connection 7
Nov 3 18:41:18 raspberrypi vhusbdarmpi4[544]: Executed "" for onReset.0a12.0001
Nov 3 18:42:27 raspberrypi mtp-probe: checking bus 1, device 7: "/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.2"
Nov 3 18:42:27 raspberrypi mtp-probe: bus: 1, device: 7 was not an MTP device
Nov 3 18:42:27 raspberrypi mtp-probe: checking bus 1, device 7: "/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.2"
Nov 3 18:42:27 raspberrypi mtp-probe: bus: 1, device: 7 was not an MTP device
Nov 3 18:42:27 raspberrypi mtp-probe: checking bus 1, device 12: "/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.3/1-1.3.3.2"
Nov 3 18:42:27 raspberrypi mtp-probe: bus: 1, device: 12 was not an MTP device
Nov 3 18:42:27 raspberrypi mtp-probe: checking bus 1, device 7: "/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.2"
Nov 3 18:42:28 raspberrypi mtp-probe: checking bus 1, device 5: "/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.1"
Nov 3 18:42:28 raspberrypi mtp-probe: bus: 1, device: 5 was not an MTP device
Nov 3 18:42:28 raspberrypi mtp-probe: checking bus 1, device 15: "/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.3/1-1.3.3.3"
Nov 3 18:42:28 raspberrypi mtp-probe: bus: 1, device: 7 was not an MTP device
Nov 3 18:42:28 raspberrypi mtp-probe: bus: 1, device: 15 was not an MTP device
Nov 3 18:42:28 raspberrypi vhusbdarmpi4[521]: >>> Starting VirtualHere USB Server v4.4.4 (Built: Sep 16 2022, 14:21:51)<<<
Nov 3 18:42:28 raspberrypi vhusbdarmpi4[521]: Using configuration /usr/local/etc/virtualhere/config.ini
Nov 3 18:42:28 raspberrypi vhusbdarmpi4[533]: Server licensed to=100000008341c6e0 max_devices=unlimited
Nov 3 18:42:28 raspberrypi vhusbdarmpi4[533]: Using large URB's
Nov 3 18:42:28 raspberrypi vhusbdarmpi4[533]: Listening on all network interfaces at TCP port 7575
Nov 3 18:42:28 raspberrypi vhusbdarmpi4[533]: Found Full speed device [1532:0528] "Razer, Razer BlackShark V2 Pro" at address 11333
Nov 3 18:42:28 raspberrypi vhusbdarmpi4[533]: Warning, could not open device product file /sys/bus/usb/devices/1-1.4.4.1/product, error 2 (No such file or directory)
Nov 3 18:42:28 raspberrypi vhusbdarmpi4[533]: Found Full speed device [0a12:0001] "0x0a12, 0x0001" at address 11441
Nov 3 18:42:28 raspberrypi vhusbdarmpi4[533]: Found Full speed device [1532:0528] "Razer, Razer BlackShark V2 Pro" at address 1131
Nov 3 18:42:28 raspberrypi vhusbdarmpi4[533]: Warning, could not open device product file /sys/bus/usb/devices/1-1.4.2/product, error 2 (No such file or directory)
Nov 3 18:42:28 raspberrypi vhusbdarmpi4[533]: Found Full speed device [0a12:0001] "0x0a12, 0x0001" at address 1142
Nov 3 18:42:28 raspberrypi vhusbdarmpi4[533]: Found Full speed device [1532:0528] "Razer, Razer BlackShark V2 Pro" at address 113342
Nov 3 18:42:28 raspberrypi vhusbdarmpi4[533]: Warning, could not open device product file /sys/bus/usb/devices/1-1.4.4.2/product, error 2 (No such file or directory)
Nov 3 18:42:28 raspberrypi vhusbdarmpi4[533]: Found Full speed device [0a12:0001] "0x0a12, 0x0001" at address 11442
Nov 3 18:42:28 raspberrypi vhusbdarmpi4[533]: Found Full speed device [1532:0528] "Razer, Razer BlackShark V2 Pro" at address 11332
Nov 3 18:42:28 raspberrypi vhusbdarmpi4[533]: Found Full speed device [1532:0528] "Razer, Razer BlackShark V2 Pro" at address 1132
Nov 3 18:42:28 raspberrypi vhusbdarmpi4[533]: Warning, could not open device product file /sys/bus/usb/devices/1-1.4.3/product, error 2 (No such file or directory)
Nov 3 18:42:28 raspberrypi vhusbdarmpi4[533]: Found Full speed device [0a12:0001] "0x0a12, 0x0001" at address 1143
Nov 3 18:42:28 raspberrypi vhusbdarmpi4[533]: Warning, could not open device product file /sys/bus/usb/devices/1-1.4.1/product, error 2 (No such file or directory)
Nov 3 18:42:28 raspberrypi vhusbdarmpi4[533]: Found Full speed device [0a12:0001] "0x0a12, 0x0001" at address 1141
Nov 3 18:42:28 raspberrypi vhusbdarmpi4[533]: Found Full speed device [1532:0528] "Razer, Razer BlackShark V2 Pro" at address 113343
Nov 3 18:42:28 raspberrypi vhusbdarmpi4[533]: Warning, could not open device product file /sys/bus/usb/devices/1-1.4.4.3/product, error 2 (No such file or directory)
Nov 3 18:42:28 raspberrypi vhusbdarmpi4[533]: Found Full speed device [0a12:0001] "0x0a12, 0x0001" at address 11443
Nov 3 18:42:29 raspberrypi mtp-probe: checking bus 1, device 19: "/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.3/1-1.3.3.4/1-1.3.3.4.3"
Nov 3 18:42:29 raspberrypi mtp-probe: bus: 1, device: 19 was not an MTP device
Nov 3 18:42:29 raspberrypi mtp-probe: checking bus 1, device 18: "/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.3/1-1.3.3.4/1-1.3.3.4.2"
Nov 3 18:42:29 raspberrypi mtp-probe: bus: 1, device: 18 was not an MTP device
Nov 3 18:42:29 raspberrypi vhusbdarmpi4[533]: Error 13 opening device file '/sys//module/8021q/uevent', Permission denied
Nov 3 18:42:29 raspberrypi mtp-probe: checking bus 1, device 12: "/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.3/1-1.3.3.2"
Nov 3 18:42:29 raspberrypi mtp-probe: bus: 1, device: 12 was not an MTP device
Nov 3 18:42:29 raspberrypi mtp-probe: checking bus 1, device 15: "/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.3/1-1.3.3.3"
Nov 3 18:42:29 raspberrypi mtp-probe: bus: 1, device: 15 was not an MTP device
Nov 3 18:42:29 raspberrypi mtp-probe: checking bus 1, device 19: "/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.3/1-1.3.3.4/1-1.3.3.4.3"
Nov 3 18:42:29 raspberrypi mtp-probe: bus: 1, device: 19 was not an MTP device
Nov 3 18:42:29 raspberrypi mtp-probe: checking bus 1, device 18: "/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.3/1-1.3.3.4/1-1.3.3.4.2"
Nov 3 18:42:29 raspberrypi mtp-probe: bus: 1, device: 18 was not an MTP device
Nov 3 18:42:43 raspberrypi vhusbdarmpi4[533]: 10.4.2.103 connected as connection 1 (Standard TCP)
Nov 3 18:42:43 raspberrypi vhusbdarmpi4[533]: Device 11332 [1532:0528] BOUND to connection 1
Nov 3 18:42:43 raspberrypi vhusbdarmpi4[533]: Executed "" for onReset.0a12.0001
Nov 3 18:42:43 raspberrypi vhusbdarmpi4[533]: Device 1143 [0a12:0001] BOUND to connection 1
Nov 3 18:42:44 raspberrypi vhusbdarmpi4[533]: Executed "" for onReset.0a12.0001
Nov 3 18:42:52 raspberrypi vhusbdarmpi4[533]: 10.4.2.105 connected as connection 4 (Standard TCP)
Nov 3 18:42:52 raspberrypi vhusbdarmpi4[533]: Device 113342 [1532:0528] BOUND to connection 4
Nov 3 18:42:52 raspberrypi vhusbdarmpi4[533]: Executed "" for onReset.0a12.0001
Nov 3 18:42:52 raspberrypi vhusbdarmpi4[533]: Device 11442 [0a12:0001] BOUND to connection 4
Nov 3 18:42:53 raspberrypi vhusbdarmpi4[533]: Executed "" for onReset.0a12.0001
Nov 3 18:42:53 raspberrypi vhusbdarmpi4[533]: 10.4.2.104 connected as connection 7 (Standard TCP)
Nov 3 18:42:54 raspberrypi vhusbdarmpi4[533]: Device 11333 [1532:0528] BOUND to connection 7
Nov 3 18:42:54 raspberrypi vhusbdarmpi4[533]: Executed "" for onReset.0a12.0001
Nov 3 18:42:54 raspberrypi vhusbdarmpi4[533]: Device 11441 [0a12:0001] BOUND to connection 7
Nov 3 18:42:54 raspberrypi vhusbdarmpi4[533]: Executed "" for onReset.0a12.0001
Nov 3 18:42:57 raspberrypi vhusbdarmpi4[533]: 10.4.2.101 connected as connection 10 (Standard TCP)
Nov 3 18:42:57 raspberrypi vhusbdarmpi4[533]: Device 1131 [1532:0528] BOUND to connection 10
Nov 3 18:42:57 raspberrypi vhusbdarmpi4[533]: Executed "" for onReset.0a12.0001
Nov 3 18:42:57 raspberrypi vhusbdarmpi4[533]: Device 1141 [0a12:0001] BOUND to connection 10
Nov 3 18:43:09 raspberrypi vhusbdarmpi4[533]: Executed "" for onReset.0a12.0001
Nov 3 18:43:10 raspberrypi vhusbdarmpi4[533]: 10.4.2.102 connected as connection 13 (Standard TCP)
Nov 3 18:43:10 raspberrypi vhusbdarmpi4[533]: Executed "" for onReset.0a12.0001
Nov 3 18:43:10 raspberrypi vhusbdarmpi4[533]: Device 1142 [0a12:0001] BOUND to connection 13
Nov 3 18:43:10 raspberrypi vhusbdarmpi4[533]: Executed "" for onReset.0a12.0001
Nov 3 18:43:10 raspberrypi vhusbdarmpi4[533]: Device 1132 [1532:0528] BOUND to connection 13
Nov 3 18:43:12 raspberrypi vhusbdarmpi4[533]: 10.4.2.106 connected as connection 16 (Standard TCP)
Nov 3 18:43:12 raspberrypi vhusbdarmpi4[533]: Device 113343 [1532:0528] BOUND to connection 16
Nov 3 18:43:12 raspberrypi vhusbdarmpi4[533]: Executed "" for onReset.0a12.0001
Nov 3 18:43:12 raspberrypi vhusbdarmpi4[533]: Device 11443 [0a12:0001] BOUND to connection 16
Nov 3 18:43:12 raspberrypi vhusbdarmpi4[533]: Executed "" for onReset.0a12.0001
Nov 3 18:43:14 raspberrypi vhusbdarmpi4[533]: Error 22 discarding urb 0x2038a90 for device /sys/bus/usb/devices/1-1.4.4.1, Invalid argument (abort endpoint)
Nov 3 18:43:14 raspberrypi vhusbdarmpi4[533]: Error 22 discarding urb 0x2038930 for device /sys/bus/usb/devices/1-1.4.4.1, Invalid argument (abort endpoint)
Nov 3 18:43:14 raspberrypi vhusbdarmpi4[533]: Error 22 discarding urb 0x2038930 for device /sys/bus/usb/devices/1-1.4.4.1, Invalid argument (abort endpoint)
Nov 3 18:43:14 raspberrypi vhusbdarmpi4[533]: 192.168.11.84 connected as connection 19 (Standard TCP)
Nov 3 18:43:21 raspberrypi vhusbdarmpi4[533]: Error 22 discarding urb 0x2150160 for device /sys/bus/usb/devices/1-1.4.4.3, Invalid argument (abort endpoint)
Nov 3 18:43:21 raspberrypi vhusbdarmpi4[533]: Error 22 discarding urb 0x21503f0 for device /sys/bus/usb/devices/1-1.4.4.3, Invalid argument (abort endpoint)
Nov 3 18:43:21 raspberrypi vhusbdarmpi4[533]: Error 22 discarding urb 0x2150680 for device /sys/bus/usb/devices/1-1.4.4.3, Invalid argument (abort endpoint)
Nov 3 18:44:06 raspberrypi vhusbdarmpi4[533]: Device 11441 [0a12:0001] UNBOUND from connection 7
Nov 3 18:44:08 raspberrypi vhusbdarmpi4[533]: Executed "" for onReset.0a12.0001
Nov 3 18:44:08 raspberrypi vhusbdarmpi4[533]: Device 11441 [0a12:0001] BOUND to connection 7
Nov 3 18:44:08 raspberrypi vhusbdarmpi4[533]: Executed "" for onReset.0a12.0001
The latency is consistently below 1ms, as we use Gigabit Ethernet connection, while some spikes to 4ms is rarely seen.
Please help... Here is the lsusb -t
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/1p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
|__ Port 3: Dev 3, If 0, Class=Hub, Driver=hub/4p, 480M
|__ Port 1: Dev 5, If 1, Class=Audio, Driver=usbfs, 12M
|__ Port 1: Dev 5, If 2, Class=Audio, Driver=usbfs, 12M
|__ Port 1: Dev 5, If 0, Class=Audio, Driver=usbfs, 12M
|__ Port 1: Dev 5, If 3, Class=Human Interface Device, Driver=usbfs, 12M
|__ Port 2: Dev 7, If 3, Class=Human Interface Device, Driver=usbfs, 12M
|__ Port 2: Dev 7, If 1, Class=Audio, Driver=usbfs, 12M
|__ Port 2: Dev 7, If 2, Class=Audio, Driver=usbfs, 12M
|__ Port 2: Dev 7, If 0, Class=Audio, Driver=usbfs, 12M
|__ Port 3: Dev 9, If 0, Class=Hub, Driver=hub/4p, 480M
|__ Port 2: Dev 12, If 1, Class=Audio, Driver=usbfs, 12M
|__ Port 2: Dev 12, If 2, Class=Audio, Driver=usbfs, 12M
|__ Port 2: Dev 12, If 0, Class=Audio, Driver=usbfs, 12M
|__ Port 2: Dev 12, If 3, Class=Human Interface Device, Driver=usbfs, 12M
|__ Port 3: Dev 15, If 0, Class=Audio, Driver=usbfs, 12M
|__ Port 3: Dev 15, If 1, Class=Audio, Driver=usbfs, 12M
|__ Port 3: Dev 15, If 2, Class=Audio, Driver=usbfs, 12M
|__ Port 3: Dev 15, If 3, Class=Human Interface Device, Driver=usbfs, 12M
|__ Port 4: Dev 17, If 0, Class=Hub, Driver=hub/4p, 480M
|__ Port 2: Dev 18, If 3, Class=Human Interface Device, Driver=usbfs, 12M
|__ Port 2: Dev 18, If 1, Class=Audio, Driver=usbfs, 12M
|__ Port 2: Dev 18, If 2, Class=Audio, Driver=usbfs, 12M
|__ Port 2: Dev 18, If 0, Class=Audio, Driver=usbfs, 12M
|__ Port 3: Dev 19, If 2, Class=Audio, Driver=usbfs, 12M
|__ Port 3: Dev 19, If 0, Class=Audio, Driver=usbfs, 12M
|__ Port 3: Dev 19, If 3, Class=Human Interface Device, Driver=usbfs, 12M
|__ Port 3: Dev 19, If 1, Class=Audio, Driver=usbfs, 12M
|__ Port 4: Dev 4, If 0, Class=Hub, Driver=hub/4p, 480M
|__ Port 4: Dev 11, If 0, Class=Hub, Driver=hub/4p, 480M
|__ Port 1: Dev 13, If 0, Class=Wireless, Driver=usbfs, 12M
|__ Port 1: Dev 13, If 1, Class=Wireless, Driver=usbfs, 12M
|__ Port 2: Dev 14, If 0, Class=Wireless, Driver=usbfs, 12M
|__ Port 2: Dev 14, If 1, Class=Wireless, Driver=usbfs, 12M
|__ Port 3: Dev 16, If 1, Class=Wireless, Driver=usbfs, 12M
|__ Port 3: Dev 16, If 0, Class=Wireless, Driver=usbfs, 12M
|__ Port 2: Dev 8, If 0, Class=Wireless, Driver=usbfs, 12M
|__ Port 2: Dev 8, If 1, Class=Wireless, Driver=usbfs, 12M
|__ Port 3: Dev 10, If 0, Class=Wireless, Driver=usbfs, 12M
|__ Port 3: Dev 10, If 1, Class=Wireless, Driver=usbfs, 12M
|__ Port 1: Dev 6, If 1, Class=Wireless, Driver=usbfs, 12M
|__ Port 1: Dev 6, If 0, Class=Wireless, Driver=usbfs, 12M
.
Thanks for the detailed log.
Here is the culprit
[ 6.729180] usb 1-1.3.3.4.2: Not enough bandwidth for altsetting 1
[ 6.737448] usb 1-1.3.3.4.2: Not enough bandwidth for new device state.
[ 6.737501] usb 1-1.3.3.4.2: Not enough bandwidth for altsetting 1
[ 6.741443] usb 1-1.3.3.4.2: Not enough bandwidth for new device state.
[ 6.741515] usb 1-1.3.3.4.2: Not enough bandwidth for altsetting 2
What is happening is that the USB bus is running out of space for transferring USB data. This is a limitation of the pi4. You need another physical VirtualHere USB server for the other 6 devices
Recommendation for other hardware
Hi Michael,
Thank you so much for your swift reply!
Could you recommend other Single Board Computer or other hardware that have better USB capability? Adding another Raspberry Pi is a good solution, but it would make the deployment more difficult on our side.
.
You could try a recent Intel based pc if you have one. They have mulitple USB busses built into the cpu system . For a test, You could just plug all the usb devices in there and see if it returns a similar error message to the pi
Thank you so much
Thank you so much for your help! I will update you about it soon once we done the test.
You have been most helpful and your software is magical.
Would you recommend we run on linux or windows OS?
.
Definitely Linux