I'm having trouble installing Raspberrypi 4.

Submitted by JAEWOOK KIM on #1

I tried to make a virtualhere usb server using RaspberryFi 4 and installed RaspberryFi OS on RaspberryFi first, then moved cloudhub-pi4-factory-sdcard.zip back to SD card using win32 diskimager and confirmed that CloudHub_xxxx is visible. But I entered the ip address to set up the connect via LAN in "I want my CloudHub to be part of an existing network". Then cloudHub is not displayed.
Reinstalling the OS on the SD card will still not work when you decompress and install cloudhub-pi4-factory-sdcard.zip.
The LED on the Raspberry Pie keeps turning red, but the green keeps flashing irregularly.
What should I do?

"Connect pin 1 and 40 for 3 seconds" Should I try this method?

Submitted by Michael on Sat, 2024/02/24 - 14:36

#2

Yes try that method and reset it that way.

 

However it should work with connecting to an ethernet network. Let me know if it happens again

Submitted by JAEWOOK KIM on Sat, 2024/02/24 - 16:05

#3

When I connecting ethernet cable it does not work.
When I try to connect number 1 and 40 with a jumper cable, do I turn it off or  it on?

Submitted by Michael on Sun, 2024/02/25 - 07:08

#5

OK thanks for the images, i think i see what is happening.

  1. There is no graphical user interface when using cloudhub. If you plug the pi into a hdmi monitor you wont see much. Perhaps just this scrolling log. The cloudhub image is meant to be flashed to sd card then the pi powered on. Then the cloudhub_xxx network will appar and you connect to that.
  2. It does actually look like you corrupted your sd card somehow. To resolve that simply format the sd card using the https://www.sdcard.org/downloads/formatter/ software and when thats finished, write the cloudhub image again and it will work.

Submitted by JAEWOOK KIM on Mon, 2024/02/26 - 23:48

#6

After overwrite format using SD Card formatter, flash the file to SDcard to boot raspberrypi and it will work fine.
I have also purchased a license.
Thank you.