Hello,
I'm running virtualhere on a Raspberrry PI 3+ with RaspianOS Lite 64Bit.
I have a performance issue and after tryng everything mentioned in Forum and FAQs does not help.
Installation and also Connection was very fine. I connected my Lasercutter and that works without problems :)
But the camera that is assembled there - I can't get the pictures really good.
What I tested:
- Camera connection to windows Client - Works
- Camera connection on my debian Client does work - but only with 320x240 (and flickering)
- Also tested on Raspberry PI4 (4GB)
I'm connected through the good old fashonied LAN cable.
I try to find a solution - because with usbip (commandline) the complete setup works without problems - but I want use your software (pretty good software)
Simply bound the camera and der laser on the raspberry pi (with script) and attached it on client. If I use camorama - no problem, no flickering with the highest resolution.
Debian (client) version: 12.6
Raspian (host) version: 12.6
USBIP version on client: usbip (usbip-utils 2.0)
USBIP version on host: usbip (usbip-utils 2.0)
ALso tried setting the memory (client + host): /sys/module/usbcore/parameters/usbfs_memory_mb
Are the any things I can try? Or any Idea.
I'm normally use Linux (for years) so it would be nice I you can help me to find a solution.
.
Yes that is a bug i think in virtualhere. I have investigated this before and couldnt find the issue but i have a few more ideas Its on my TODO list to fix but no ETA yet...