Cannt connect to USB hub

Hello

I have a problem with connecting to USB hub. Below I paste system message:

02:26:37 INFO :VirtualHere Client 3.1.7 starting (Compiled: Oct 8 2015 00:48:00) 02:26:37 INFO :Using config at C:\Users\inpay\AppData\Roaming\vhui.ini 02:26:37 INFO :IPC available at \\.\pipe\vhclient 02:26:38 INFO :SSL_connect failed when connecting to 10.22.4.2:7574, error:00000000:lib(0):func(0):reason(0)

I have set EnableSSL=1, I am using vhui32 and I have disable 'Auto-find hubs'
And I can connect to hub
Oct 12 10:24:25 virtualhere vhusbdx86_64: 10.12.4.30 connected Oct 12 10:24:28 virtualhere vhusbdx86_64: Warning, failed to send MSG_SIZE to connection 164, error 32 (Broken pipe) Oct 12 10:24:40 virtualhere vhusbdx86_64: Removing connection 164 (timeout)... Oct 12 10:24:40 virtualhere vhusbdx86_64: Connection 164 successfully removed
What could be the issue? Thanks, Joanna.

Did you specify sslCert and

Did you specify sslCert and SSLCAFile on the server also?

i.e the parameters at the bottom of this page https://www.virtualhere.com/configuration_faq

Hey Michael

Yes. That's our configuration:
sslPort=7574 sslCert=/home/inpay/ssl/server.pem SSLUseClientCerts=0 SSLUseCRL=0

OK, looks like a regression

OK, looks like a regression bug in the latest version of the client ill take a look tomorrow first thing and get it fixed

Thank you for looking into

Thank you for looking into that issue. In meantime could I get previous version? meaning 3.1.6?
Thanks in advance.

Hi, i think its fixed now can

I fixed it in 3.1.8 of the client available from here

Also, regarding SSL ,the

Also, regarding SSL ,the latest version of the Client it will automatically find SSL servers on the network so no client configuration is required. Simply add the sslCert=/full/path/to/server.pem to the server config.ini and the client will automatically find and connect to the server over SSLv3. See here for more details

Thank you for help and new

Thank you for help and new version! Its working now.
Joanna.

Hey again

Now I have a new issue. When client is running as service, it does not see any devices. The same is when I want run:
vhui32.exe -t "manual hub list"
But when end this task and run vhui32 and close it, then I can see all. I have tried with and without option: EnableSSL=1

Could you help me with this?
Thanks, Joanna.

Try this

vhui32.exe -t "manual hub add,ipaddress:7573"

replace ip address with the address of your server, it should be automatically found but i dont know your network setup, perhaps your are on a different subnet or sometning so bonjour packets dont get through