Virtualhere crashes on raspberry client after a couple of seconds oder minutes

Submitted by Jambo on #1

<p>I have bought a license for three devices.<br />
My virtualhere server runs on a raspberry pi2. The client runs on a raspberry pi3.<br />
The server deamon on the pi2 runs stable, there are no crashes or freezes the last days. I have tested both server versions (arm and armpi2).<br />
But everytime the pi3 connects via console or gui client the pi3 crashes after a couple of minutes or seconds. After the Crash nothing on the pi3 works anymore.<br />
Only disconnect and connect the power supply work. The pi3 without virtualhere Client runs stable every day.<br />
On both pi's the newest raspbian kernel 4.4 and firmware is running. On the pi2 are only two usb devices are connected 1. irtrans USB and 2. WMRS200 USB Receiver for a wheater Station. If i connect the irtrans the pi3 immediately crashes. If i connect the wmrs200 Receiver it takes a few minutes that the pi3 crashes.<br />
when I plug both separately, then it also happens. Between the pi's is a stable gigabit network.
</p>
<p>So I can not do anything with virtualhere. Anyone has a solution for me?
</p>

Submitted by Jambo on Wed, 2016/07/13 - 01:00

#3

<p>That is really annoying, i want to use it for my house Automation. The two raspberrys should replace one old Windows Server and a sharkoon lanport400, which under raspbian no longer works. the pi3 replaces the Server and the pi2 the lanport. Where is the problem with the Kernel and USBIO? On the client or on the Server side?<br />
I hope under Kernel 4.6 it runs otherwise virtualhere is useless to me. </p>