IP address of server in LIST command

Submitted by jmart on #1

Can we have the IP address of the server shown in the LIST command (along with the hostname)? As far as I can tell, there is no way to get the IP address of a server that is added via Auto-find when using the Windows service client. Another possible solution would be to write to the .INI as the servers are found, so that the "ManualHubs=" line can be read as soon as a new server is detected.

Please let me know if this is possible or if there is another way to get the IP address of a server that is added via Auto-Find (using Windows service client).

Submitted by Michael on Fri, 2016/09/23 - 22:00

#2

I will add a command in the next version of the client to display server info, out in a few days...

Submitted by Michael on Sat, 2016/09/24 - 15:12

#3

OK this has been added see below for an example: 

C:\Users\michael>vhui64.exe -t list

VirtualHere IPC, below are the available devices:
(Value in brackets = address, * = Auto-Use)

Beagle Hub (beaglebone:7575)
   --> STORE N GO (beaglebone.11)
Windows Hub (DESKTOP-J3IJMI7:50697)
   --> VMware Virtual USB Sensors (DESKTOP-J3IJMI7.2)
   --> VMware Virtual USB Mouse (DESKTOP-J3IJMI7.1)

Auto-Find currently off
Auto-Use All currently off
Reverse Lookup currently on
VirtualHere not running as a service

C:\Users\michael>vhui64.exe -t "SERVER INFO,Beagle Hub"

NAME: Beagle Hub
VERSION: 3.0.5
STATE: Logged in
ADDRESS: beaglebone-2.local. (192.168.0.207)
PORT: 7575
CONNECTED FOR: 26 sec
MAX DEVICES: unlimited
SERIAL NUMBER: 3213BBBK0361