Use G27 on Liquidsky using VirtualHere

Submitted by Odacir on #1

Hi,

Its possible use G27 Wheel, on Liquidsky?

Submitted by Michael on Sat, 2017/07/29 - 10:10

#2

Hi, yes i think it does, you just need to run the server on your local pc and the client in the cloud.

Put in the ip address of your local pc into the client by right clicking USB Hubs->Specify Hubs and enter the ip address

When you see the wheel listed, you need to right click on the wheel and select "Custom Event Handler.." and enter

onReset.$VENDOR_ID$.$PRODUCT_ID$=

then press ok, now right click and select USE. The wheel should appear connected in liquidsky

Submitted by Odacir on Fri, 2017/08/11 - 01:15

#3

Hi Michael,

Worked like a charm!!!!!

Thanks a lot :-D

Submitted by Fake View on Sat, 2017/08/19 - 07:48

#4

I have done everything just as Michael said but it is impossible for my client to connect to my USB hubs.... my server is running on my local pc and client in the cloud and it doesn't connect. I have even put in my ip address in the specify hubs but it still doesn't work, I don't know what to do to fix it. :(

Submitted by Michael on Sat, 2017/08/19 - 12:25

#5

You need to open port 7575 on your home router and forward it to the internal ip address of your virtualhere server running at home.