Usb server on Windows server

Submitted by llol on #1

Hello,
I would like to use a device that is plugged to my Windows server on a virtual machine.
But when I install the server usb on my Windows server and I install the client on a virtual machine, the usb server is not discovered by the client

Could you help me
Thanks,

Submitted by Michael on Wed, 2019/05/29 - 08:46

#2

They will automatically find each other if they are on the same subnet. Your network might be different.

So in the client right click USB Hubs->Specify Hubs and put in the ip address of the server

Submitted by llol on Wed, 2019/05/29 - 16:19

#3

I already tried this but it does not work ...
And I already tried to install the usb client on my windows server and at that moment I found the server.
So I decided to install the usb server on my virtual machine and then look on the client of my windows server and I saw the usb server of my virtual machine ...
I do not know if it's clear to you ...
In short, this conection works in the direction entrants and not in the outgoing direction of my windows server ..

Submitted by Michael on Wed, 2019/05/29 - 16:28

#4

You need to run the virtualhere server on the windows server and the client inside the vm. Dont run it any other way. If they dont find each other, put in the ip address of the server into the client like i suggested above. If that doesnt work you have a network issue not allowing port tcp 7575 between the two