usb devices went away, virtualhere server still seen by client.

After restarting my pi getting the following, and devices not visible any more:


root@CloudHub_1e093d:~# dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.14.180 (michael@ubuntu) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r11063-85e04e9f46)) #0 Sat May 16 18:32:20 2020
[ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Raspberry Pi Zero W Rev 1.1
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] cma: Reserved 16 MiB at 0x1ac00000
[ 0.000000] On node 0 totalpages: 114688
[ 0.000000] free_area_init_node: node 0, pgdat c0826eec, node_mem_map dbc6a100
[ 0.000000] Normal zone: 896 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 114688 pages, LIFO batch:31
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 113792
[ 0.000000] Kernel command line: 8250.nr_uarts=1 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 smsc95xx.macaddr=B8:27:EB:4B:5C:68 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 kgdboc=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=squashfs,ext4 rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 430496K/458752K available (4436K kernel code, 157K rwdata, 1028K rodata, 1024K init, 327K bss, 11872K reserved, 16384K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xdc800000 - 0xff800000 ( 560 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdc000000 ( 448 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0555268 (5429 kB)
[ 0.000000] .init : 0xc0700000 - 0xc0800000 (1024 kB)
[ 0.000000] .data : 0xc0800000 - 0xc08276c0 ( 158 kB)
[ 0.000000] .bss : 0xc082bdd0 - 0xc087db24 ( 328 kB)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000028] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
[ 0.000065] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
[ 0.000145] bcm2835: system timer (irq = 27)
[ 0.000640] Console: colour dummy device 80x30
[ 0.001145] console [tty1] enabled
[ 0.001204] Calibrating delay loop... 697.95 BogoMIPS (lpj=3489792)
[ 0.060289] pid_max: default: 32768 minimum: 301
[ 0.060484] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.060527] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.061237] CPU: Testing write buffer coherency: ok
[ 0.062016] Setting up static identity map for 0x100000 - 0x10005c
[ 0.069104] random: get_random_u32 called from bucket_table_alloc+0x160/0x1a8 with crng_init=0
[ 0.069493] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
[ 0.069872] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.069935] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.071970] pinctrl core: initialized pinctrl subsystem
[ 0.073161] NET: Registered protocol family 16
[ 0.075755] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 0.081116] cpuidle: using governor ladder
[ 0.081175] cpuidle: using governor menu
[ 0.081691] Serial: AMBA PL011 UART driver
[ 0.084071] bcm2835-mbox 2000b880.mailbox: mailbox enabled
[ 0.084739] uart-pl011 20201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[ 0.117006] bcm2835-dma 20007000.dma: DMA legacy API manager at dc80f000, dmachans=0x1
[ 0.119914] SCSI subsystem initialized
[ 0.120151] usbcore: registered new interface driver usbfs
[ 0.120266] usbcore: registered new interface driver hub
[ 0.120398] usbcore: registered new device driver usb
[ 0.130629] raspberrypi-firmware soc:firmware: Attached to firmware from 2018-11-23 19:36
[ 0.132126] clocksource: Switched to clocksource timer
[ 0.140736] NET: Registered protocol family 2
[ 0.141650] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.141763] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.141853] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.142005] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.142057] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.142356] NET: Registered protocol family 1
[ 0.143775] Crashlog allocated RAM at address 0x3f00000
[ 0.144200] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 0.150412] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.153003] io scheduler noop registered
[ 0.153056] io scheduler deadline registered
[ 0.153440] io scheduler cfq registered (default)
[ 0.155653] BCM2708FB: allocated DMA memory 5ad00000
[ 0.155729] BCM2708FB: allocated DMA channel 0 @ dc80f000
[ 0.163712] Console: switching to colour frame buffer device 82x26
[ 0.172548] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[ 0.176940] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
[ 0.183466] vc-sm: Videocore shared memory driver
[ 0.198615] brd: module loaded
[ 0.207267] loop: module loaded
[ 0.210267] usbcore: registered new interface driver smsc95xx
[ 0.213127] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 0.243902] dwc_otg 20980000.usb: base=0xf0980000
[ 0.446714] Core Release: 2.80a
[ 0.449379] Setting default values for core params
[ 0.452010] Finished setting default values for core params
[ 0.654791] Using Buffer DMA mode
[ 0.657410] Periodic Transfer Interrupt Enhancement - disabled
[ 0.659969] Multiprocessor Interrupt Enhancement - disabled
[ 0.662598] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 0.665244] Dedicated Tx FIFOs mode
[ 0.668743] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xdad14000 dma = 0x5ad14000 len=9024
[ 0.674442] FIQ FSM acceleration enabled for :
[ 0.674442] Non-periodic Split Transactions
[ 0.674442] Periodic Split Transactions
[ 0.674442] High-Speed Isochronous Endpoints
[ 0.674442] Interrupt/Control Split Transaction hack enabled
[ 0.687653] dwc_otg: Microframe scheduler enabled
[ 0.687854] WARN::hcd_init_fiq:459: FIQ on core 0 at 0xc03e48e4
[ 0.690530] WARN::hcd_init_fiq:460: FIQ ASM at 0xc03e4b6c length 36
[ 0.693161] WARN::hcd_init_fiq:486: MPHI regs_base at 0xf0006000
[ 0.695907] dwc_otg 20980000.usb: DWC OTG Controller
[ 0.698610] dwc_otg 20980000.usb: new USB bus registered, assigned bus number 1
[ 0.701346] dwc_otg 20980000.usb: irq 56, io mem 0x00000000
[ 0.704093] Init: Port Power? op_state=1
[ 0.706730] Init: Power Port (0)
[ 0.709560] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.712297] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.714979] usb usb1: Product: DWC OTG Controller
[ 0.717584] usb usb1: Manufacturer: Linux 4.14.180 dwc_otg_hcd
[ 0.720198] usb usb1: SerialNumber: 20980000.usb
[ 0.723591] hub 1-0:1.0: USB hub found
[ 0.726200] hub 1-0:1.0: 1 port detected
[ 0.729405] dwc_otg: FIQ enabled
[ 0.729414] dwc_otg: NAK holdoff enabled
[ 0.729419] dwc_otg: FIQ split-transaction FSM enabled
[ 0.729435] Module dwc_common_port init
[ 0.729905] usbcore: registered new interface driver uas
[ 0.732679] usbcore: registered new interface driver usb-storage
[ 0.735267] mousedev: PS/2 mouse device common for all mice
[ 0.737729] i2c /dev entries driver
[ 0.741058] bcm2835-wdt 20100000.watchdog: Broadcom BCM2835 watchdog timer
[ 0.744199] bcm2835-cpufreq: min=700000 max=1000000
[ 0.747485] sdhci: Secure Digital Host Controller Interface driver
[ 0.750140] sdhci: Copyright(c) Pierre Ossman
[ 0.753360] mmc-bcm2835 20300000.mmc: could not get clk, deferring probe
[ 0.756655] sdhost-bcm2835 20202000.mmc: could not get clk, deferring probe
[ 0.759570] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.763998] vchiq: vchiq_init_state: slot_zero = dad80000, is_master = 0
[ 0.767875] [vc_sm_connected_init]: start
[ 0.777613] [vc_sm_connected_init]: end - returning 0
[ 0.780865] NET: Registered protocol family 10
[ 0.784437] Segment Routing with IPv6
[ 0.786487] NET: Registered protocol family 17
[ 0.788456] 8021q: 802.1Q VLAN Support v1.8
[ 0.796692] uart-pl011 20201000.serial: cts_event_workaround enabled
[ 0.798839] 20201000.serial: ttyAMA0 at MMIO 0x20201000 (irq = 81, base_baud = 0) is a PL011 rev2
[ 0.804625] console [ttyS0] disabled
[ 0.806813] 20215040.serial: ttyS0 at MMIO 0x0 (irq = 160, base_baud = 31250000) is a 16550
[ 1.590168] console [ttyS0] enabled
[ 1.597069] mmc-bcm2835 20300000.mmc: mmc_debug:0 mmc_debug2:0
[ 1.605258] mmc-bcm2835 20300000.mmc: DMA channel allocated
[ 1.673443] sdhost: log_buf @ dad13000 (5ad13000)
[ 1.717157] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 1.727323] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.737263] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.746806] random: fast init done
[ 1.753735] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 1.762191] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ 1.770596] of_cfs_init
[ 1.775115] of_cfs_init: OK
[ 1.800876] Waiting for root device /dev/mmcblk0p2...
[ 1.902741] mmc1: new high speed SDIO card at address 0001
[ 1.923772] mmc0: host does not support reading read-only switch, assuming write-enable
[ 1.942344] mmc0: new high speed SDHC card at address aaaa
[ 1.950339] mmcblk0: mmc0:aaaa SL16G 14.8 GiB
[ 1.962997] mmcblk0: p1 p2
[ 1.989912] VFS: Mounted root (squashfs filesystem) readonly on device 179:2.
[ 2.003057] Freeing unused kernel memory: 1024K
[ 2.359902] init: Console is alive
[ 2.365617] init: - watchdog -
[ 2.749481] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 2.822577] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 2.842512] init: - preinit -
[ 3.365557] random: jshn: uninitialized urandom read (4 bytes read)
[ 3.409773] random: jshn: uninitialized urandom read (4 bytes read)
[ 3.444157] random: jshn: uninitialized urandom read (4 bytes read)
[ 7.072964] F2FS-fs (loop0): Mounted with checkpoint version = 5ccce294
[ 7.084538] mount_root: switching to f2fs overlay
[ 7.168612] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 7.186263] urandom-seed: Seeding with /etc/urandom.seed
[ 7.267040] procd: - early -
[ 7.273056] procd: - watchdog -
[ 7.932316] procd: - watchdog -
[ 7.938747] procd: - ubus -
[ 7.999749] urandom_read: 1 callbacks suppressed
[ 7.999759] random: ubusd: uninitialized urandom read (4 bytes read)
[ 8.015762] random: ubusd: uninitialized urandom read (4 bytes read)
[ 8.024787] random: ubusd: uninitialized urandom read (4 bytes read)
[ 8.034576] procd: - init -
[ 8.599190] kmodloader: loading kernel modules from /etc/modules.d/*
[ 8.678638] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 8.694706] urngd: jent-rng init failed, err: 2
[ 8.714309] hidraw: raw HID events driver (C) Jiri Kosina
[ 8.726824] bcm2835_alsa bcm2835_alsa: card created with 8 channels
[ 8.743707] usbcore: registered new interface driver asix
[ 8.752976] usbcore: registered new interface driver ax88179_178a
[ 8.764682] Loading modules backported from Linux version v4.19.120-0-gfdc072324f3c
[ 8.775970] Backport generated by backports.git v4.19.120-1-0-g60c3a249
[ 8.787862] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 8.804571] nf_conntrack version 0.5.0 (7168 buckets, 28672 max)
[ 8.848960] usbcore: registered new interface driver r8152
[ 8.874841] xt_time: kernel timezone is -0000
[ 8.922034] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[ 9.069780] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.raspberrypi,model-zero-w.txt failed with error -2
[ 9.088403] brcmfmac mmc1:0001:1: Falling back to user helper
[ 9.140581] firmware brcm!brcmfmac43430-sdio.raspberrypi,model-zero-w.txt: firmware_loading_store: map pages failed
[ 9.329631] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[ 9.343599] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.clm_blob failed with error -2
[ 9.359025] brcmfmac mmc1:0001:1: Falling back to user helper
[ 9.382907] firmware brcm!brcmfmac43430-sdio.clm_blob: firmware_loading_store: map pages failed
[ 9.398434] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-11), device may have limited channels available
[ 9.419380] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Oct 23 2017 03:55:53 version 7.45.98.38 (r674442 CY) FWID 01-e58d219f
[ 9.493141] usbcore: registered new interface driver brcmfmac
[ 9.502301] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 14.626894] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 16.640824] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready


VKB Gladiator NXT joystick and Logitech X56 Throttle via a generic powered USB 2.0 hub that I had been using succesfully with these devices plugged directly into my computer via the hub.

The hub basically looks like this https://store.hrdistributors.com/v/vspfiles/photos/tripp_U222-004-R-2.j…

Do you mean the log from the client application?

I just started up everything again, the devices were visible, then disappeared once, reappeared, then disappeared and did not return.
System messages:

2021-01-19 15:56:38 INFO :VirtualHere Client 5.1.4 starting (Compiled: Dec 13 2020 20:13:07)
2021-01-19 15:56:38 INFO :Client OS is Windows 10 (build 19041), 64-bit edition
2021-01-19 15:56:38 INFO :Using config at C:\Users\Brian\AppData\Roaming\vhui.ini
2021-01-19 15:56:38 INFO :IPC available at \\.\pipe\vhclient
2021-01-19 15:56:38 INFO :Auto-find (Bonjour) on
2021-01-19 15:56:38 INFO :Auto-find (Bonjour SSL) on
2021-01-19 15:56:42 INFO :Drivers are up-to-date
2021-01-19 15:56:42 INFO :Connected to the VirtualHere Client Driver (Version 2)


dmesg output:

VirtualHere CloudHub_1e093d
=== WARNING! =====================================
There is no root password defined on this device!
Use the "passwd" command to set up a new password
in order to prevent unauthorized SSH logins.
--------------------------------------------------
root@CloudHub_1e093d:~# dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.14.180 (michael@ubuntu) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r11063-85e04e9f46)) #0 Sat May 16 18:32:20 2020
[ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Raspberry Pi Zero W Rev 1.1
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] cma: Reserved 16 MiB at 0x1ac00000
[ 0.000000] On node 0 totalpages: 114688
[ 0.000000] free_area_init_node: node 0, pgdat c0826eec, node_mem_map dbc6a100
[ 0.000000] Normal zone: 896 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 114688 pages, LIFO batch:31
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 113792
[ 0.000000] Kernel command line: 8250.nr_uarts=1 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 smsc95xx.macaddr=B8:27:EB:4B:5C:68 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 kgdboc=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=squashfs,ext4 rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 430496K/458752K available (4436K kernel code, 157K rwdata, 1028K rodata, 1024K init, 327K bss, 11872K reserved, 16384K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xdc800000 - 0xff800000 ( 560 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdc000000 ( 448 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0555268 (5429 kB)
[ 0.000000] .init : 0xc0700000 - 0xc0800000 (1024 kB)
[ 0.000000] .data : 0xc0800000 - 0xc08276c0 ( 158 kB)
[ 0.000000] .bss : 0xc082bdd0 - 0xc087db24 ( 328 kB)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000029] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
[ 0.000068] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
[ 0.000148] bcm2835: system timer (irq = 27)
[ 0.000642] Console: colour dummy device 80x30
[ 0.001148] console [tty1] enabled
[ 0.001209] Calibrating delay loop... 697.95 BogoMIPS (lpj=3489792)
[ 0.060294] pid_max: default: 32768 minimum: 301
[ 0.060491] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.060535] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.061249] CPU: Testing write buffer coherency: ok
[ 0.062021] Setting up static identity map for 0x100000 - 0x10005c
[ 0.069097] random: get_random_u32 called from bucket_table_alloc+0x160/0x1a8 with crng_init=0
[ 0.069490] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
[ 0.069870] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.069932] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.071968] pinctrl core: initialized pinctrl subsystem
[ 0.073162] NET: Registered protocol family 16
[ 0.075750] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 0.081128] cpuidle: using governor ladder
[ 0.081187] cpuidle: using governor menu
[ 0.081701] Serial: AMBA PL011 UART driver
[ 0.084079] bcm2835-mbox 2000b880.mailbox: mailbox enabled
[ 0.084750] uart-pl011 20201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[ 0.117030] bcm2835-dma 20007000.dma: DMA legacy API manager at dc80f000, dmachans=0x1
[ 0.119934] SCSI subsystem initialized
[ 0.120174] usbcore: registered new interface driver usbfs
[ 0.120291] usbcore: registered new interface driver hub
[ 0.120421] usbcore: registered new device driver usb
[ 0.130630] raspberrypi-firmware soc:firmware: Attached to firmware from 2018-11-23 19:36
[ 0.132131] clocksource: Switched to clocksource timer
[ 0.140718] NET: Registered protocol family 2
[ 0.141630] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.141743] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.141834] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.141989] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.142041] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.142345] NET: Registered protocol family 1
[ 0.143763] Crashlog allocated RAM at address 0x3f00000
[ 0.144189] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 0.150378] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.152954] io scheduler noop registered
[ 0.153007] io scheduler deadline registered
[ 0.153391] io scheduler cfq registered (default)
[ 0.155608] BCM2708FB: allocated DMA memory 5ad00000
[ 0.155685] BCM2708FB: allocated DMA channel 0 @ dc80f000
[ 0.163666] Console: switching to colour frame buffer device 82x26
[ 0.172542] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[ 0.176981] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
[ 0.183546] vc-sm: Videocore shared memory driver
[ 0.198672] brd: module loaded
[ 0.207277] loop: module loaded
[ 0.210333] usbcore: registered new interface driver smsc95xx
[ 0.213218] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 0.244015] dwc_otg 20980000.usb: base=0xf0980000
[ 0.446844] Core Release: 2.80a
[ 0.449524] Setting default values for core params
[ 0.452229] Finished setting default values for core params
[ 0.654977] Using Buffer DMA mode
[ 0.657554] Periodic Transfer Interrupt Enhancement - disabled
[ 0.660157] Multiprocessor Interrupt Enhancement - disabled
[ 0.662816] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 0.665473] Dedicated Tx FIFOs mode
[ 0.668938] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xdad14000 dma = 0x5ad14000 len=9024
[ 0.674591] FIQ FSM acceleration enabled for :
[ 0.674591] Non-periodic Split Transactions
[ 0.674591] Periodic Split Transactions
[ 0.674591] High-Speed Isochronous Endpoints
[ 0.674591] Interrupt/Control Split Transaction hack enabled
[ 0.687873] dwc_otg: Microframe scheduler enabled
[ 0.688068] WARN::hcd_init_fiq:459: FIQ on core 0 at 0xc03e48e4
[ 0.690700] WARN::hcd_init_fiq:460: FIQ ASM at 0xc03e4b6c length 36
[ 0.693365] WARN::hcd_init_fiq:486: MPHI regs_base at 0xf0006000
[ 0.696137] dwc_otg 20980000.usb: DWC OTG Controller
[ 0.698836] dwc_otg 20980000.usb: new USB bus registered, assigned bus number 1
[ 0.701571] dwc_otg 20980000.usb: irq 56, io mem 0x00000000
[ 0.704316] Init: Port Power? op_state=1
[ 0.706910] Init: Power Port (0)
[ 0.709759] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.712528] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.715215] usb usb1: Product: DWC OTG Controller
[ 0.717820] usb usb1: Manufacturer: Linux 4.14.180 dwc_otg_hcd
[ 0.720441] usb usb1: SerialNumber: 20980000.usb
[ 0.723796] hub 1-0:1.0: USB hub found
[ 0.726417] hub 1-0:1.0: 1 port detected
[ 0.729684] dwc_otg: FIQ enabled
[ 0.729693] dwc_otg: NAK holdoff enabled
[ 0.729698] dwc_otg: FIQ split-transaction FSM enabled
[ 0.729714] Module dwc_common_port init
[ 0.730187] usbcore: registered new interface driver uas
[ 0.732971] usbcore: registered new interface driver usb-storage
[ 0.735562] mousedev: PS/2 mouse device common for all mice
[ 0.738027] i2c /dev entries driver
[ 0.741281] bcm2835-wdt 20100000.watchdog: Broadcom BCM2835 watchdog timer
[ 0.744487] bcm2835-cpufreq: min=700000 max=1000000
[ 0.747784] sdhci: Secure Digital Host Controller Interface driver
[ 0.750434] sdhci: Copyright(c) Pierre Ossman
[ 0.753657] mmc-bcm2835 20300000.mmc: could not get clk, deferring probe
[ 0.756913] sdhost-bcm2835 20202000.mmc: could not get clk, deferring probe
[ 0.759832] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.764284] vchiq: vchiq_init_state: slot_zero = dad80000, is_master = 0
[ 0.768154] [vc_sm_connected_init]: start
[ 0.777869] [vc_sm_connected_init]: end - returning 0
[ 0.781130] NET: Registered protocol family 10
[ 0.784705] Segment Routing with IPv6
[ 0.786757] NET: Registered protocol family 17
[ 0.788697] 8021q: 802.1Q VLAN Support v1.8
[ 0.796949] uart-pl011 20201000.serial: cts_event_workaround enabled
[ 0.799094] 20201000.serial: ttyAMA0 at MMIO 0x20201000 (irq = 81, base_baud = 0) is a PL011 rev2
[ 0.804873] console [ttyS0] disabled
[ 0.807009] 20215040.serial: ttyS0 at MMIO 0x0 (irq = 160, base_baud = 31250000) is a 16550
[ 1.590489] console [ttyS0] enabled
[ 1.597359] mmc-bcm2835 20300000.mmc: mmc_debug:0 mmc_debug2:0
[ 1.605541] mmc-bcm2835 20300000.mmc: DMA channel allocated
[ 1.613567] Indeed it is in host mode hprt0 = 00021501
[ 1.688912] random: fast init done
[ 1.733747] sdhost: log_buf @ dad13000 (5ad13000)
[ 1.777272] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 1.787405] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.797324] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.808474] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 1.822220] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ 1.830703] of_cfs_init
[ 1.835221] of_cfs_init: OK
[ 1.840692] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 1.849558] Waiting for root device /dev/mmcblk0p2...
[ 1.856855] Indeed it is in host mode hprt0 = 00001101
[ 2.036603] mmc1: new high speed SDIO card at address 0001
[ 2.064020] mmc0: host does not support reading read-only switch, assuming write-enable
[ 2.083789] mmc0: new high speed SDHC card at address aaaa
[ 2.092032] mmcblk0: mmc0:aaaa SL16G 14.8 GiB
[ 2.105020] mmcblk0: p1 p2
[ 2.124358] usb 1-1: New USB device found, idVendor=05e3, idProduct=0605
[ 2.133183] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.142345] usb 1-1: Product: USB2.0 Hub
[ 2.149851] hub 1-1:1.0: USB hub found
[ 2.156442] hub 1-1:1.0: 4 ports detected
[ 2.164155] VFS: Mounted root (squashfs filesystem) readonly on device 179:2.
[ 2.176252] Freeing unused kernel memory: 1024K
[ 2.469088] init: Console is alive
[ 2.475016] init: - watchdog -
[ 2.541680] usb 1-1.2: new full-speed USB device number 3 using dwc_otg
[ 2.893317] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 2.967354] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 2.987524] init: - preinit -
[ 3.122251] usb 1-1.2: device not accepting address 3, error -32
[ 3.312042] usb 1-1.2: new full-speed USB device number 4 using dwc_otg
[ 3.434455] usb 1-1.2: device descriptor read/64, error -32
[ 3.544908] random: jshn: uninitialized urandom read (4 bytes read)
[ 3.590939] random: jshn: uninitialized urandom read (4 bytes read)
[ 3.626363] random: jshn: uninitialized urandom read (4 bytes read)
[ 3.662293] usb 1-1.2: device descriptor read/64, error -32
[ 3.782556] usb 1-1-port2: attempt power cycle
[ 4.442198] usb 1-1.2: new full-speed USB device number 5 using dwc_otg
[ 4.882198] usb 1-1.2: device not accepting address 5, error -32
[ 4.982252] usb 1-1.2: new full-speed USB device number 6 using dwc_otg
[ 5.432189] usb 1-1.2: device not accepting address 6, error -32
[ 5.441517] usb 1-1-port2: unable to enumerate USB device
[ 5.542200] usb 1-1.3: new full-speed USB device number 7 using dwc_otg
[ 5.652189] usb 1-1.3: device descriptor read/64, error -32
[ 5.872199] usb 1-1.3: device descriptor read/64, error -32
[ 6.312194] usb 1-1.3: new full-speed USB device number 8 using dwc_otg
[ 6.422198] usb 1-1.3: device descriptor read/64, error -32
[ 6.642196] usb 1-1.3: device descriptor read/64, error -32
[ 6.762734] usb 1-1-port3: attempt power cycle
[ 7.268025] F2FS-fs (loop0): Mounted with checkpoint version = 5ccce297
[ 7.279504] mount_root: switching to f2fs overlay
[ 7.365238] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 7.382911] urandom-seed: Seeding with /etc/urandom.seed
[ 7.445479] usb 1-1.3: new full-speed USB device number 9 using dwc_otg
[ 7.474463] procd: - early -
[ 7.479654] procd: - watchdog -
[ 7.892193] usb 1-1.3: device not accepting address 9, error -71
[ 7.992201] usb 1-1.3: new full-speed USB device number 10 using dwc_otg
[ 8.144272] procd: - watchdog -
[ 8.150735] procd: - ubus -
[ 8.198605] urandom_read: 1 callbacks suppressed
[ 8.198615] random: ubusd: uninitialized urandom read (4 bytes read)
[ 8.215350] random: ubusd: uninitialized urandom read (4 bytes read)
[ 8.224374] random: ubusd: uninitialized urandom read (4 bytes read)
[ 8.234294] procd: - init -
[ 8.450090] usb 1-1.3: device not accepting address 10, error -32
[ 8.458875] usb 1-1-port3: unable to enumerate USB device
[ 8.809244] kmodloader: loading kernel modules from /etc/modules.d/*
[ 8.893738] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 8.924133] hidraw: raw HID events driver (C) Jiri Kosina
[ 8.932335] urngd: jent-rng init failed, err: 2
[ 8.944325] bcm2835_alsa bcm2835_alsa: card created with 8 channels
[ 8.961077] usbcore: registered new interface driver asix
[ 8.970486] usbcore: registered new interface driver ax88179_178a
[ 8.982251] Loading modules backported from Linux version v4.19.120-0-gfdc072324f3c
[ 8.993815] Backport generated by backports.git v4.19.120-1-0-g60c3a249
[ 9.005864] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 9.022637] nf_conntrack version 0.5.0 (7168 buckets, 28672 max)
[ 9.067040] usbcore: registered new interface driver r8152
[ 9.092991] xt_time: kernel timezone is -0000
[ 9.139794] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[ 9.287612] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.raspberrypi,model-zero-w.txt failed with error -2
[ 9.306349] brcmfmac mmc1:0001:1: Falling back to user helper
[ 9.358640] firmware brcm!brcmfmac43430-sdio.raspberrypi,model-zero-w.txt: firmware_loading_store: map pages failed
[ 9.547648] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[ 9.561577] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.clm_blob failed with error -2
[ 9.576945] brcmfmac mmc1:0001:1: Falling back to user helper
[ 9.600761] firmware brcm!brcmfmac43430-sdio.clm_blob: firmware_loading_store: map pages failed
[ 9.615214] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-11), device may have limited channels available
[ 9.636253] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Oct 23 2017 03:55:53 version 7.45.98.38 (r674442 CY) FWID 01-e58d219f
[ 9.710525] usbcore: registered new interface driver brcmfmac
[ 9.767114] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 10.293049] dwc_otg_handle_wakeup_detected_intr lxstate = 2
[ 10.802270] usb 1-1.2: new full-speed USB device number 11 using dwc_otg
[ 10.997293] usb 1-1.2: New USB device found, idVendor=0738, idProduct=a221
[ 11.007170] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=4
[ 11.017357] usb 1-1.2: Product: Saitek Pro Flight X-56 Rhino Throttle
[ 11.026597] usb 1-1.2: Manufacturer: Mad Catz
[ 11.033662] usb 1-1.2: SerialNumber: ko058110
[ 13.822273] usb 1-1.3: new full-speed USB device number 12 using dwc_otg
[ 13.979725] usb 1-1.3: New USB device found, idVendor=231d, idProduct=0200
[ 13.989353] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 13.999274] usb 1-1.3: Product: VKB-Sim Gladiator NXT R
[ 14.007261] usb 1-1.3: Manufacturer: © Alex Oz 2012-2019
[ 15.303580] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 16.867758] random: crng init done
[ 16.874467] random: 3 urandom warning(s) missed due to ratelimiting
[ 17.043448] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 27.231875] usb 1-1.3: reset full-speed USB device number 12 using dwc_otg
[ 27.471905] usb 1-1.2: reset full-speed USB device number 11 using dwc_otg
[ 27.711942] usb 1-1.3: reset full-speed USB device number 12 using dwc_otg
[ 28.071879] usb 1-1.2: reset full-speed USB device number 11 using dwc_otg
[ 53.050753] usb usb1-port1: disabled by hub (EMI?), re-enabling...
[ 53.059855] usb 1-1: USB disconnect, device number 2
[ 53.067571] usb 1-1.2: USB disconnect, device number 11
[ 53.077357] usb 1-1.3: USB disconnect, device number 12
[ 53.300815] Indeed it is in host mode hprt0 = 00001d01
[ 53.510698] usb 1-1: new high-speed USB device number 13 using dwc_otg
[ 53.520985] Indeed it is in host mode hprt0 = 00001101
[ 53.762601] usb 1-1: New USB device found, idVendor=05e3, idProduct=0605
[ 53.772249] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 53.782242] usb 1-1: Product: USB2.0 Hub
[ 53.793949] hub 1-1:1.0: USB hub found
[ 53.802183] hub 1-1:1.0: 4 ports detected
[ 54.120635] usb 1-1.2: new full-speed USB device number 14 using dwc_otg
[ 54.276343] usb 1-1.2: New USB device found, idVendor=0738, idProduct=a221
[ 54.286080] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=4
[ 54.296174] usb 1-1.2: Product: Saitek Pro Flight X-56 Rhino Throttle
[ 54.305340] usb 1-1.2: Manufacturer: Mad Catz
[ 54.312242] usb 1-1.2: SerialNumber: ko058110
[ 54.420623] usb 1-1.3: new full-speed USB device number 15 using dwc_otg
[ 54.530616] usb 1-1.3: device descriptor read/64, error -32
[ 54.750614] usb 1-1.3: device descriptor read/64, error -32
[ 54.970630] usb 1-1.3: new full-speed USB device number 16 using dwc_otg
[ 55.080641] usb 1-1.3: device descriptor read/64, error -32
[ 55.300647] usb 1-1.3: device descriptor read/64, error -32
[ 55.420943] usb 1-1-port3: attempt power cycle
[ 56.080695] usb 1-1.3: new full-speed USB device number 17 using dwc_otg
[ 56.520777] usb 1-1.3: device not accepting address 17, error -32
[ 57.580666] usb 1-1.2: reset full-speed USB device number 14 using dwc_otg
[ 58.030704] usb 1-1.2: reset full-speed USB device number 14 using dwc_otg
[ 59.950743] usb 1-1.3: new full-speed USB device number 19 using dwc_otg
[ 60.097484] usb 1-1.3: New USB device found, idVendor=231d, idProduct=0200
[ 60.107207] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 60.117370] usb 1-1.3: Product: VKB-Sim Gladiator NXT R
[ 60.125725] usb 1-1.3: Manufacturer: © Alex Oz 2012-2019
[ 60.240847] usb 1-1.3: reset full-speed USB device number 19 using dwc_otg
[ 60.680846] usb 1-1.3: reset full-speed USB device number 19 using dwc_otg
[ 61.030726] usb 1-1.2: reset full-speed USB device number 14 using dwc_otg
[ 61.140724] usb 1-1.2: device descriptor read/64, error -71
[ 61.261321] usb 1-1-port2: cannot reset (err = -71)
[ 61.269027] usb 1-1-port2: cannot reset (err = -71)
[ 61.490937] hub 1-1:1.0: hub_ext_port_status failed (err = -71)
[ 61.499539] usb 1-1-port2: cannot reset (err = -71)
[ 61.507445] usb 1-1-port2: cannot reset (err = -71)
[ 61.514766] usb 1-1-port2: Cannot enable. Maybe the USB cable is bad?
[ 61.524353] usb 1-1-port2: cannot disable (err = -71)
[ 61.531856] usb 1-1-port2: cannot reset (err = -71)
[ 61.538588] usb 1-1-port2: cannot reset (err = -71)
[ 61.545591] usb 1-1-port2: cannot reset (err = -71)
[ 61.552390] usb 1-1-port2: cannot reset (err = -71)
[ 61.559452] usb 1-1-port2: cannot reset (err = -71)
[ 61.565880] usb 1-1-port2: Cannot enable. Maybe the USB cable is bad?
[ 61.575144] usb 1-1-port2: cannot reset (err = -71)
[ 61.582022] usb 1-1-port2: cannot reset (err = -71)
[ 61.588545] usb 1-1-port2: cannot reset (err = -71)
[ 61.810873] hub 1-1:1.0: hub_ext_port_status failed (err = -71)
[ 61.818729] usb 1-1-port2: cannot reset (err = -71)
[ 61.825461] usb 1-1-port2: Cannot enable. Maybe the USB cable is bad?
[ 61.834419] usb 1-1-port2: cannot disable (err = -71)
[ 61.841866] usb 1-1-port2: cannot reset (err = -71)
[ 61.848438] usb 1-1-port2: cannot reset (err = -71)
[ 61.855073] usb 1-1-port2: cannot reset (err = -71)
[ 61.861641] usb 1-1-port2: cannot reset (err = -71)
[ 61.868117] usb 1-1-port2: cannot reset (err = -71)
[ 61.874243] usb 1-1-port2: Cannot enable. Maybe the USB cable is bad?
[ 61.882788] usb 1-1-port2: cannot disable (err = -71)
[ 61.889194] usb 1-1-port2: cannot disable (err = -71)
[ 61.895896] hub 1-1:1.0: hub_ext_port_status failed (err = -71)
[ 63.635926] usb 1-1-port3: cannot reset (err = -71)
[ 63.642879] usb 1-1-port3: cannot reset (err = -71)
[ 63.649669] usb 1-1-port3: cannot reset (err = -71)
[ 63.657009] usb 1-1-port3: cannot reset (err = -71)
[ 63.663684] usb 1-1-port3: cannot reset (err = -71)
[ 63.669758] usb 1-1-port3: Cannot enable. Maybe the USB cable is bad?
[ 63.678096] usb 1-1-port3: cannot disable (err = -71)
[ 63.685046] usb 1-1-port3: cannot reset (err = -71)
[ 63.691794] usb 1-1-port3: cannot reset (err = -71)
[ 63.698030] usb 1-1-port3: cannot reset (err = -71)
[ 63.704421] usb 1-1-port3: cannot reset (err = -71)
[ 63.710501] usb 1-1-port3: cannot reset (err = -71)
[ 63.716476] usb 1-1-port3: Cannot enable. Maybe the USB cable is bad?
[ 63.724527] usb 1-1-port3: cannot disable (err = -71)
[ 63.731258] usb 1-1-port3: cannot reset (err = -71)
[ 63.737472] usb 1-1-port3: cannot reset (err = -71)
[ 63.743964] usb 1-1-port3: cannot reset (err = -71)
[ 63.750210] usb 1-1-port3: cannot reset (err = -71)
[ 63.756634] usb 1-1-port3: cannot reset (err = -71)
[ 63.762650] usb 1-1-port3: Cannot enable. Maybe the USB cable is bad?
[ 63.770575] usb 1-1-port3: cannot disable (err = -71)
[ 63.777044] usb 1-1-port3: cannot reset (err = -71)
[ 63.783373] usb 1-1-port3: cannot reset (err = -71)
[ 63.789452] usb 1-1-port3: cannot reset (err = -71)
[ 63.795786] usb 1-1-port3: cannot reset (err = -71)
[ 63.802165] usb 1-1-port3: cannot reset (err = -71)
[ 63.808027] usb 1-1-port3: Cannot enable. Maybe the USB cable is bad?
[ 63.815957] usb 1-1-port3: cannot disable (err = -71)
[ 63.822422] usb 1-1-port3: cannot disable (err = -71)
[ 63.828714] hub 1-1:1.0: hub_ext_port_status failed (err = -71)
[ 63.836613] hub 1-1:1.0: hub_ext_port_status failed (err = -71)
[ 65.800942] usb usb1-port1: disabled by hub (EMI?), re-enabling...
[ 65.808856] usb 1-1: USB disconnect, device number 13
[ 65.815583] usb 1-1.2: USB disconnect, device number 14
[ 65.823750] usb 1-1.3: USB disconnect, device number 19
[ 66.030892] Indeed it is in host mode hprt0 = 00001101
[ 66.240822] usb 1-1: new high-speed USB device number 20 using dwc_otg
[ 66.249452] NYET/NAK/ACK/other in non-error case, 0x00000002
[ 66.257188] NYET/NAK/ACK/other in non-error case, 0x00000002
[ 66.265363] NYET/NAK/ACK/other in non-error case, 0x00000002
[ 66.273065] NYET/NAK/ACK/other in non-error case, 0x00000002
[ 66.280547] NYET/NAK/ACK/other in non-error case, 0x00000002
[ 66.288768] NYET/NAK/ACK/other in non-error case, 0x00000002
[ 66.296321] NYET/NAK/ACK/other in non-error case, 0x00000002
[ 66.303810] NYET/NAK/ACK/other in non-error case, 0x00000002
[ 66.313013] Indeed it is in host mode hprt0 = 00001101
[ 66.530863] usb 1-1: device descriptor read/64, error -71
[ 66.651363] NYET/NAK/ACK/other in non-error case, 0x00000002
[ 66.659098] Indeed it is in host mode hprt0 = 00001101
[ 66.870807] usb 1-1: device descriptor read/64, error -71
[ 66.990993] Indeed it is in host mode hprt0 = 00001101
[ 67.200854] usb 1-1: new high-speed USB device number 21 using dwc_otg
[ 67.210171] NYET/NAK/ACK/other in non-error case, 0x00000002
[ 67.218107] NYET/NAK/ACK/other in non-error case, 0x00000002
[ 67.226448] Indeed it is in host mode hprt0 = 00001101
[ 67.420811] usb 1-1: device descriptor read/64, error -71
[ 67.541120] NYET/NAK/ACK/other in non-error case, 0x00000002
[ 67.549082] NYET/NAK/ACK/other in non-error case, 0x00000002
[ 67.556875] NYET/NAK/ACK/other in non-error case, 0x00000002
[ 67.564600] NYET/NAK/ACK/other in non-error case, 0x00000002
[ 67.572851] Indeed it is in host mode hprt0 = 00001101
[ 67.780913] usb 1-1: device descriptor read/64, error -71
[ 67.900922] usb usb1-port1: attempt power cycle
root@CloudHub_1e093d:~#


I rebooted the pi after removing the X56 throttle, when it came up the VKB stick was not visible in client, dmesg output:
\
VirtualHere CloudHub_1e093d
=== WARNING! =====================================
There is no root password defined on this device!
Use the "passwd" command to set up a new password
in order to prevent unauthorized SSH logins.
--------------------------------------------------
root@CloudHub_1e093d:~# dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.14.180 (michael@ubuntu) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r11063-85e04e9f46)) #0 Sat May 16 18:32:20 2020
[ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Raspberry Pi Zero W Rev 1.1
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] cma: Reserved 16 MiB at 0x1ac00000
[ 0.000000] On node 0 totalpages: 114688
[ 0.000000] free_area_init_node: node 0, pgdat c0826eec, node_mem_map dbc6a100
[ 0.000000] Normal zone: 896 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 114688 pages, LIFO batch:31
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 113792
[ 0.000000] Kernel command line: 8250.nr_uarts=1 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 smsc95xx.macaddr=B8:27:EB:4B:5C:68 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 kgdboc=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=squashfs,ext4 rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 430496K/458752K available (4436K kernel code, 157K rwdata, 1028K rodata, 1024K init, 327K bss, 11872K reserved, 16384K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xdc800000 - 0xff800000 ( 560 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdc000000 ( 448 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0555268 (5429 kB)
[ 0.000000] .init : 0xc0700000 - 0xc0800000 (1024 kB)
[ 0.000000] .data : 0xc0800000 - 0xc08276c0 ( 158 kB)
[ 0.000000] .bss : 0xc082bdd0 - 0xc087db24 ( 328 kB)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000029] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
[ 0.000067] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
[ 0.000149] bcm2835: system timer (irq = 27)
[ 0.000643] Console: colour dummy device 80x30
[ 0.001147] console [tty1] enabled
[ 0.001207] Calibrating delay loop... 697.95 BogoMIPS (lpj=3489792)
[ 0.060292] pid_max: default: 32768 minimum: 301
[ 0.060488] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.060531] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.061240] CPU: Testing write buffer coherency: ok
[ 0.062020] Setting up static identity map for 0x100000 - 0x10005c
[ 0.069099] random: get_random_u32 called from bucket_table_alloc+0x160/0x1a8 with crng_init=0
[ 0.069493] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
[ 0.069871] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.069932] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.071968] pinctrl core: initialized pinctrl subsystem
[ 0.073160] NET: Registered protocol family 16
[ 0.075749] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 0.081114] cpuidle: using governor ladder
[ 0.081173] cpuidle: using governor menu
[ 0.081691] Serial: AMBA PL011 UART driver
[ 0.084077] bcm2835-mbox 2000b880.mailbox: mailbox enabled
[ 0.084743] uart-pl011 20201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[ 0.117037] bcm2835-dma 20007000.dma: DMA legacy API manager at dc80f000, dmachans=0x1
[ 0.119940] SCSI subsystem initialized
[ 0.120171] usbcore: registered new interface driver usbfs
[ 0.120288] usbcore: registered new interface driver hub
[ 0.120419] usbcore: registered new device driver usb
[ 0.130630] raspberrypi-firmware soc:firmware: Attached to firmware from 2018-11-23 19:36
[ 0.132131] clocksource: Switched to clocksource timer
[ 0.140717] NET: Registered protocol family 2
[ 0.141635] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.141749] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.141840] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.141994] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.142047] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.142351] NET: Registered protocol family 1
[ 0.143767] Crashlog allocated RAM at address 0x3f00000
[ 0.144189] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 0.150385] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.152983] io scheduler noop registered
[ 0.153038] io scheduler deadline registered
[ 0.153425] io scheduler cfq registered (default)
[ 0.155634] BCM2708FB: allocated DMA memory 5ad00000
[ 0.155710] BCM2708FB: allocated DMA channel 0 @ dc80f000
[ 0.163695] Console: switching to colour frame buffer device 82x26
[ 0.172718] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[ 0.177194] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
[ 0.183692] vc-sm: Videocore shared memory driver
[ 0.198822] brd: module loaded
[ 0.207505] loop: module loaded
[ 0.210572] usbcore: registered new interface driver smsc95xx
[ 0.213426] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 0.244187] dwc_otg 20980000.usb: base=0xf0980000
[ 0.446972] Core Release: 2.80a
[ 0.449608] Setting default values for core params
[ 0.452315] Finished setting default values for core params
[ 0.655071] Using Buffer DMA mode
[ 0.657703] Periodic Transfer Interrupt Enhancement - disabled
[ 0.660320] Multiprocessor Interrupt Enhancement - disabled
[ 0.662971] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 0.665583] Dedicated Tx FIFOs mode
[ 0.669050] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xdad14000 dma = 0x5ad14000 len=9024
[ 0.674774] FIQ FSM acceleration enabled for :
[ 0.674774] Non-periodic Split Transactions
[ 0.674774] Periodic Split Transactions
[ 0.674774] High-Speed Isochronous Endpoints
[ 0.674774] Interrupt/Control Split Transaction hack enabled
[ 0.688005] dwc_otg: Microframe scheduler enabled
[ 0.688208] WARN::hcd_init_fiq:459: FIQ on core 0 at 0xc03e48e4
[ 0.690894] WARN::hcd_init_fiq:460: FIQ ASM at 0xc03e4b6c length 36
[ 0.693572] WARN::hcd_init_fiq:486: MPHI regs_base at 0xf0006000
[ 0.696339] dwc_otg 20980000.usb: DWC OTG Controller
[ 0.698986] dwc_otg 20980000.usb: new USB bus registered, assigned bus number 1
[ 0.701725] dwc_otg 20980000.usb: irq 56, io mem 0x00000000
[ 0.704478] Init: Port Power? op_state=1
[ 0.707111] Init: Power Port (0)
[ 0.709984] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.712750] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.715385] usb usb1: Product: DWC OTG Controller
[ 0.717975] usb usb1: Manufacturer: Linux 4.14.180 dwc_otg_hcd
[ 0.720590] usb usb1: SerialNumber: 20980000.usb
[ 0.723981] hub 1-0:1.0: USB hub found
[ 0.726634] hub 1-0:1.0: 1 port detected
[ 0.729837] dwc_otg: FIQ enabled
[ 0.729846] dwc_otg: NAK holdoff enabled
[ 0.729851] dwc_otg: FIQ split-transaction FSM enabled
[ 0.729867] Module dwc_common_port init
[ 0.730322] usbcore: registered new interface driver uas
[ 0.733053] usbcore: registered new interface driver usb-storage
[ 0.735650] mousedev: PS/2 mouse device common for all mice
[ 0.738114] i2c /dev entries driver
[ 0.741432] bcm2835-wdt 20100000.watchdog: Broadcom BCM2835 watchdog timer
[ 0.744652] bcm2835-cpufreq: min=700000 max=1000000
[ 0.747891] sdhci: Secure Digital Host Controller Interface driver
[ 0.750518] sdhci: Copyright(c) Pierre Ossman
[ 0.753743] mmc-bcm2835 20300000.mmc: could not get clk, deferring probe
[ 0.757043] sdhost-bcm2835 20202000.mmc: could not get clk, deferring probe
[ 0.759977] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.764394] vchiq: vchiq_init_state: slot_zero = dad80000, is_master = 0
[ 0.768236] [vc_sm_connected_init]: start
[ 0.777982] [vc_sm_connected_init]: end - returning 0
[ 0.781197] NET: Registered protocol family 10
[ 0.784742] Segment Routing with IPv6
[ 0.786794] NET: Registered protocol family 17
[ 0.788746] 8021q: 802.1Q VLAN Support v1.8
[ 0.797020] uart-pl011 20201000.serial: cts_event_workaround enabled
[ 0.799119] 20201000.serial: ttyAMA0 at MMIO 0x20201000 (irq = 81, base_baud = 0) is a PL011 rev2
[ 0.804903] console [ttyS0] disabled
[ 0.807079] 20215040.serial: ttyS0 at MMIO 0x0 (irq = 160, base_baud = 31250000) is a 16550
[ 1.590468] console [ttyS0] enabled
[ 1.597358] mmc-bcm2835 20300000.mmc: mmc_debug:0 mmc_debug2:0
[ 1.605500] mmc-bcm2835 20300000.mmc: DMA channel allocated
[ 1.673448] sdhost: log_buf @ dad13000 (5ad13000)
[ 1.718220] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 1.728387] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.738325] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.747708] random: fast init done
[ 1.754642] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 1.762206] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ 1.770590] of_cfs_init
[ 1.775108] of_cfs_init: OK
[ 1.800887] Waiting for root device /dev/mmcblk0p2...
[ 1.903848] mmc1: new high speed SDIO card at address 0001
[ 1.924413] mmc0: host does not support reading read-only switch, assuming write-enable
[ 1.944265] mmc0: new high speed SDHC card at address aaaa
[ 1.953309] mmcblk0: mmc0:aaaa SL16G 14.8 GiB
[ 1.966150] mmcblk0: p1 p2
[ 1.989487] VFS: Mounted root (squashfs filesystem) readonly on device 179:2.
[ 2.001434] Freeing unused kernel memory: 1024K
[ 2.319386] init: Console is alive
[ 2.325143] init: - watchdog -
[ 2.709132] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 2.781969] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 2.801959] init: - preinit -
[ 3.367262] random: jshn: uninitialized urandom read (4 bytes read)
[ 3.412429] random: jshn: uninitialized urandom read (4 bytes read)
[ 3.446521] random: jshn: uninitialized urandom read (4 bytes read)
[ 7.070954] F2FS-fs (loop0): Mounted with checkpoint version = 5ccce298
[ 7.082836] mount_root: switching to f2fs overlay
[ 7.166306] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 7.184074] urandom-seed: Seeding with /etc/urandom.seed
[ 7.265528] procd: - early -
[ 7.270725] procd: - watchdog -
[ 7.929829] procd: - watchdog -
[ 7.936461] procd: - ubus -
[ 7.997552] urandom_read: 1 callbacks suppressed
[ 7.997564] random: ubusd: uninitialized urandom read (4 bytes read)
[ 8.013596] random: ubusd: uninitialized urandom read (4 bytes read)
[ 8.022640] random: ubusd: uninitialized urandom read (4 bytes read)
[ 8.032439] procd: - init -
[ 8.578751] kmodloader: loading kernel modules from /etc/modules.d/*
[ 8.658604] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 8.694121] hidraw: raw HID events driver (C) Jiri Kosina
[ 8.706992] urngd: jent-rng init failed, err: 2
[ 8.718054] bcm2835_alsa bcm2835_alsa: card created with 8 channels
[ 8.735923] usbcore: registered new interface driver asix
[ 8.745207] usbcore: registered new interface driver ax88179_178a
[ 8.756825] Loading modules backported from Linux version v4.19.120-0-gfdc072324f3c
[ 8.768177] Backport generated by backports.git v4.19.120-1-0-g60c3a249
[ 8.780054] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 8.796859] nf_conntrack version 0.5.0 (7168 buckets, 28672 max)
[ 8.840916] usbcore: registered new interface driver r8152
[ 8.866792] xt_time: kernel timezone is -0000
[ 8.913910] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[ 9.049771] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.raspberrypi,model-zero-w.txt failed with error -2
[ 9.066561] brcmfmac mmc1:0001:1: Falling back to user helper
[ 9.116982] firmware brcm!brcmfmac43430-sdio.raspberrypi,model-zero-w.txt: firmware_loading_store: map pages failed
[ 9.306029] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[ 9.319958] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.clm_blob failed with error -2
[ 9.335312] brcmfmac mmc1:0001:1: Falling back to user helper
[ 9.359263] firmware brcm!brcmfmac43430-sdio.clm_blob: firmware_loading_store: map pages failed
[ 9.373736] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-11), device may have limited channels available
[ 9.394747] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Oct 23 2017 03:55:53 version 7.45.98.38 (r674442 CY) FWID 01-e58d219f
[ 9.468620] usbcore: registered new interface driver brcmfmac
[ 9.524680] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 14.579068] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 16.487861] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
root@CloudHub_1e093d:~#


Then I tried with just the X56 throttle:

VirtualHere CloudHub_1e093d
=== WARNING! =====================================
There is no root password defined on this device!
Use the "passwd" command to set up a new password
in order to prevent unauthorized SSH logins.
--------------------------------------------------
root@CloudHub_1e093d:~# dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.14.180 (michael@ubuntu) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r11063-85e04e9f46)) #0 Sat May 16 18:32:20 2020
[ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Raspberry Pi Zero W Rev 1.1
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] cma: Reserved 16 MiB at 0x1ac00000
[ 0.000000] On node 0 totalpages: 114688
[ 0.000000] free_area_init_node: node 0, pgdat c0826eec, node_mem_map dbc6a100
[ 0.000000] Normal zone: 896 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 114688 pages, LIFO batch:31
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 113792
[ 0.000000] Kernel command line: 8250.nr_uarts=1 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 smsc95xx.macaddr=B8:27:EB:4B:5C:68 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 kgdboc=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=squashfs,ext4 rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 430496K/458752K available (4436K kernel code, 157K rwdata, 1028K rodata, 1024K init, 327K bss, 11872K reserved, 16384K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xdc800000 - 0xff800000 ( 560 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdc000000 ( 448 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0555268 (5429 kB)
[ 0.000000] .init : 0xc0700000 - 0xc0800000 (1024 kB)
[ 0.000000] .data : 0xc0800000 - 0xc08276c0 ( 158 kB)
[ 0.000000] .bss : 0xc082bdd0 - 0xc087db24 ( 328 kB)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000028] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
[ 0.000067] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
[ 0.000146] bcm2835: system timer (irq = 27)
[ 0.000639] Console: colour dummy device 80x30
[ 0.001145] console [tty1] enabled
[ 0.001205] Calibrating delay loop... 697.95 BogoMIPS (lpj=3489792)
[ 0.060290] pid_max: default: 32768 minimum: 301
[ 0.060487] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.060532] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.061246] CPU: Testing write buffer coherency: ok
[ 0.062022] Setting up static identity map for 0x100000 - 0x10005c
[ 0.069108] random: get_random_u32 called from bucket_table_alloc+0x160/0x1a8 with crng_init=0
[ 0.069501] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
[ 0.069882] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.069946] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.071978] pinctrl core: initialized pinctrl subsystem
[ 0.073174] NET: Registered protocol family 16
[ 0.075767] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 0.081114] cpuidle: using governor ladder
[ 0.081174] cpuidle: using governor menu
[ 0.081687] Serial: AMBA PL011 UART driver
[ 0.084068] bcm2835-mbox 2000b880.mailbox: mailbox enabled
[ 0.084739] uart-pl011 20201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[ 0.117017] bcm2835-dma 20007000.dma: DMA legacy API manager at dc80f000, dmachans=0x1
[ 0.119927] SCSI subsystem initialized
[ 0.120164] usbcore: registered new interface driver usbfs
[ 0.120279] usbcore: registered new interface driver hub
[ 0.120411] usbcore: registered new device driver usb
[ 0.130627] raspberrypi-firmware soc:firmware: Attached to firmware from 2018-11-23 19:36
[ 0.132125] clocksource: Switched to clocksource timer
[ 0.140691] NET: Registered protocol family 2
[ 0.141605] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.141719] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.141810] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.141964] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.142015] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.142316] NET: Registered protocol family 1
[ 0.143737] Crashlog allocated RAM at address 0x3f00000
[ 0.144166] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 0.150356] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.152940] io scheduler noop registered
[ 0.152993] io scheduler deadline registered
[ 0.153373] io scheduler cfq registered (default)
[ 0.155586] BCM2708FB: allocated DMA memory 5ad00000
[ 0.155662] BCM2708FB: allocated DMA channel 0 @ dc80f000
[ 0.163648] Console: switching to colour frame buffer device 82x26
[ 0.172678] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[ 0.177141] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
[ 0.183619] vc-sm: Videocore shared memory driver
[ 0.198744] brd: module loaded
[ 0.207392] loop: module loaded
[ 0.210455] usbcore: registered new interface driver smsc95xx
[ 0.213277] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 0.244055] dwc_otg 20980000.usb: base=0xf0980000
[ 0.446813] Core Release: 2.80a
[ 0.449463] Setting default values for core params
[ 0.452097] Finished setting default values for core params
[ 0.654891] Using Buffer DMA mode
[ 0.657512] Periodic Transfer Interrupt Enhancement - disabled
[ 0.660123] Multiprocessor Interrupt Enhancement - disabled
[ 0.662744] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 0.665369] Dedicated Tx FIFOs mode
[ 0.668842] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xdad14000 dma = 0x5ad14000 len=9024
[ 0.674566] FIQ FSM acceleration enabled for :
[ 0.674566] Non-periodic Split Transactions
[ 0.674566] Periodic Split Transactions
[ 0.674566] High-Speed Isochronous Endpoints
[ 0.674566] Interrupt/Control Split Transaction hack enabled
[ 0.687791] dwc_otg: Microframe scheduler enabled
[ 0.687987] WARN::hcd_init_fiq:459: FIQ on core 0 at 0xc03e48e4
[ 0.690673] WARN::hcd_init_fiq:460: FIQ ASM at 0xc03e4b6c length 36
[ 0.693356] WARN::hcd_init_fiq:486: MPHI regs_base at 0xf0006000
[ 0.696089] dwc_otg 20980000.usb: DWC OTG Controller
[ 0.698754] dwc_otg 20980000.usb: new USB bus registered, assigned bus number 1
[ 0.701493] dwc_otg 20980000.usb: irq 56, io mem 0x00000000
[ 0.704235] Init: Port Power? op_state=1
[ 0.706871] Init: Power Port (0)
[ 0.709737] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.712476] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.715125] usb usb1: Product: DWC OTG Controller
[ 0.717734] usb usb1: Manufacturer: Linux 4.14.180 dwc_otg_hcd
[ 0.720356] usb usb1: SerialNumber: 20980000.usb
[ 0.723762] hub 1-0:1.0: USB hub found
[ 0.726413] hub 1-0:1.0: 1 port detected
[ 0.729602] dwc_otg: FIQ enabled
[ 0.729611] dwc_otg: NAK holdoff enabled
[ 0.729616] dwc_otg: FIQ split-transaction FSM enabled
[ 0.729631] Module dwc_common_port init
[ 0.730089] usbcore: registered new interface driver uas
[ 0.732852] usbcore: registered new interface driver usb-storage
[ 0.735446] mousedev: PS/2 mouse device common for all mice
[ 0.737912] i2c /dev entries driver
[ 0.741242] bcm2835-wdt 20100000.watchdog: Broadcom BCM2835 watchdog timer
[ 0.744455] bcm2835-cpufreq: min=700000 max=1000000
[ 0.747675] sdhci: Secure Digital Host Controller Interface driver
[ 0.750328] sdhci: Copyright(c) Pierre Ossman
[ 0.753549] mmc-bcm2835 20300000.mmc: could not get clk, deferring probe
[ 0.756849] sdhost-bcm2835 20202000.mmc: could not get clk, deferring probe
[ 0.759787] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.764189] vchiq: vchiq_init_state: slot_zero = dad80000, is_master = 0
[ 0.768054] [vc_sm_connected_init]: start
[ 0.777785] [vc_sm_connected_init]: end - returning 0
[ 0.780987] NET: Registered protocol family 10
[ 0.784544] Segment Routing with IPv6
[ 0.786595] NET: Registered protocol family 17
[ 0.788546] 8021q: 802.1Q VLAN Support v1.8
[ 0.796818] uart-pl011 20201000.serial: cts_event_workaround enabled
[ 0.798932] 20201000.serial: ttyAMA0 at MMIO 0x20201000 (irq = 81, base_baud = 0) is a PL011 rev2
[ 0.804716] console [ttyS0] disabled
[ 0.806894] 20215040.serial: ttyS0 at MMIO 0x0 (irq = 160, base_baud = 31250000) is a 16550
[ 1.590289] console [ttyS0] enabled
[ 1.597163] mmc-bcm2835 20300000.mmc: mmc_debug:0 mmc_debug2:0
[ 1.605317] mmc-bcm2835 20300000.mmc: DMA channel allocated
[ 1.674439] sdhost: log_buf @ dad13000 (5ad13000)
[ 1.719047] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 1.728374] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.737507] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.747556] random: fast init done
[ 1.753193] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 1.762201] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ 1.770443] of_cfs_init
[ 1.774977] of_cfs_init: OK
[ 1.780582] Waiting for root device /dev/mmcblk0p2...
[ 1.901868] mmc1: new high speed SDIO card at address 0001
[ 1.923810] mmc0: host does not support reading read-only switch, assuming write-enable
[ 1.942441] mmc0: new high speed SDHC card at address aaaa
[ 1.950486] mmcblk0: mmc0:aaaa SL16G 14.8 GiB
[ 1.963107] mmcblk0: p1 p2
[ 1.999472] VFS: Mounted root (squashfs filesystem) readonly on device 179:2.
[ 2.011486] Freeing unused kernel memory: 1024K
[ 2.329490] init: Console is alive
[ 2.335206] init: - watchdog -
[ 2.719227] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 2.792024] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 2.812014] init: - preinit -
[ 3.377864] random: jshn: uninitialized urandom read (4 bytes read)
[ 3.423658] random: jshn: uninitialized urandom read (4 bytes read)
[ 3.457520] random: jshn: uninitialized urandom read (4 bytes read)
[ 7.080552] F2FS-fs (loop0): Mounted with checkpoint version = 5ccce299
[ 7.092387] mount_root: switching to f2fs overlay
[ 7.175576] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 7.193405] urandom-seed: Seeding with /etc/urandom.seed
[ 7.274780] procd: - early -
[ 7.279989] procd: - watchdog -
[ 7.939111] procd: - watchdog -
[ 7.945644] procd: - ubus -
[ 7.992099] urandom_read: 1 callbacks suppressed
[ 7.998800] random: ubusd: uninitialized urandom read (4 bytes read)
[ 8.008514] random: ubusd: uninitialized urandom read (4 bytes read)
[ 8.017531] random: ubusd: uninitialized urandom read (4 bytes read)
[ 8.027331] procd: - init -
[ 8.583781] kmodloader: loading kernel modules from /etc/modules.d/*
[ 8.653704] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 8.690098] hidraw: raw HID events driver (C) Jiri Kosina
[ 8.700868] urngd: jent-rng init failed, err: 2
[ 8.712973] bcm2835_alsa bcm2835_alsa: card created with 8 channels
[ 8.729627] usbcore: registered new interface driver asix
[ 8.738873] usbcore: registered new interface driver ax88179_178a
[ 8.750515] Loading modules backported from Linux version v4.19.120-0-gfdc072324f3c
[ 8.761840] Backport generated by backports.git v4.19.120-1-0-g60c3a249
[ 8.773832] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 8.790261] nf_conntrack version 0.5.0 (7168 buckets, 28672 max)
[ 8.834466] usbcore: registered new interface driver r8152
[ 8.860202] xt_time: kernel timezone is -0000
[ 8.907595] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[ 9.055313] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.raspberrypi,model-zero-w.txt failed with error -2
[ 9.073901] brcmfmac mmc1:0001:1: Falling back to user helper
[ 9.126273] firmware brcm!brcmfmac43430-sdio.raspberrypi,model-zero-w.txt: firmware_loading_store: map pages failed
[ 9.315355] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[ 9.329334] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.clm_blob failed with error -2
[ 9.344770] brcmfmac mmc1:0001:1: Falling back to user helper
[ 9.368498] firmware brcm!brcmfmac43430-sdio.clm_blob: firmware_loading_store: map pages failed
[ 9.383955] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-11), device may have limited channels available
[ 9.404963] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Oct 23 2017 03:55:53 version 7.45.98.38 (r674442 CY) FWID 01-e58d219f
[ 9.479193] usbcore: registered new interface driver brcmfmac
[ 9.534722] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 14.657198] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 16.791966] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 60.157481] random: crng init done
[ 60.164739] random: 3 urandom warning(s) missed due to ratelimiting
root@CloudHub_1e093d:~#


Do you mean hub looks to be under powered?

Seems to be working reliably so far with different hub. Thanks.

root@CloudHub_1e093d:~# dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.14.180 (michael@ubuntu) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r11063-85e04e9f46)) #0 Sat May 16 18:32:20 2020
[ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Raspberry Pi Zero W Rev 1.1
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] cma: Reserved 16 MiB at 0x1ac00000
[ 0.000000] On node 0 totalpages: 114688
[ 0.000000] free_area_init_node: node 0, pgdat c0826eec, node_mem_map dbc6a100
[ 0.000000] Normal zone: 896 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 114688 pages, LIFO batch:31
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 113792
[ 0.000000] Kernel command line: 8250.nr_uarts=1 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 smsc95xx.macaddr=B8:27:EB:4B:5C:68 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 kgdboc=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=squashfs,ext4 rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 430496K/458752K available (4436K kernel code, 157K rwdata, 1028K rodata, 1024K init, 327K bss, 11872K reserved, 16384K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xdc800000 - 0xff800000 ( 560 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdc000000 ( 448 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0555268 (5429 kB)
[ 0.000000] .init : 0xc0700000 - 0xc0800000 (1024 kB)
[ 0.000000] .data : 0xc0800000 - 0xc08276c0 ( 158 kB)
[ 0.000000] .bss : 0xc082bdd0 - 0xc087db24 ( 328 kB)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000028] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
[ 0.000067] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
[ 0.000147] bcm2835: system timer (irq = 27)
[ 0.000640] Console: colour dummy device 80x30
[ 0.001145] console [tty1] enabled
[ 0.001205] Calibrating delay loop... 697.95 BogoMIPS (lpj=3489792)
[ 0.060290] pid_max: default: 32768 minimum: 301
[ 0.060489] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.060532] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.061242] CPU: Testing write buffer coherency: ok
[ 0.062019] Setting up static identity map for 0x100000 - 0x10005c
[ 0.069114] random: get_random_u32 called from bucket_table_alloc+0x160/0x1a8 with crng_init=0
[ 0.069508] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
[ 0.069889] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.069951] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.071971] pinctrl core: initialized pinctrl subsystem
[ 0.073170] NET: Registered protocol family 16
[ 0.075761] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 0.081117] cpuidle: using governor ladder
[ 0.081176] cpuidle: using governor menu
[ 0.081690] Serial: AMBA PL011 UART driver
[ 0.084075] bcm2835-mbox 2000b880.mailbox: mailbox enabled
[ 0.084743] uart-pl011 20201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[ 0.117024] bcm2835-dma 20007000.dma: DMA legacy API manager at dc80f000, dmachans=0x1
[ 0.119933] SCSI subsystem initialized
[ 0.120167] usbcore: registered new interface driver usbfs
[ 0.120281] usbcore: registered new interface driver hub
[ 0.120411] usbcore: registered new device driver usb
[ 0.130620] raspberrypi-firmware soc:firmware: Attached to firmware from 2018-11-23 19:36
[ 0.132116] clocksource: Switched to clocksource timer
[ 0.140700] NET: Registered protocol family 2
[ 0.141617] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.141731] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.141821] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.141975] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.142026] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.142327] NET: Registered protocol family 1
[ 0.143747] Crashlog allocated RAM at address 0x3f00000
[ 0.144172] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 0.150369] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.152956] io scheduler noop registered
[ 0.153009] io scheduler deadline registered
[ 0.153398] io scheduler cfq registered (default)
[ 0.155615] BCM2708FB: allocated DMA memory 5ad00000
[ 0.155691] BCM2708FB: allocated DMA channel 0 @ dc80f000
[ 0.163678] Console: switching to colour frame buffer device 82x26
[ 0.172573] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[ 0.177057] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
[ 0.183592] vc-sm: Videocore shared memory driver
[ 0.198734] brd: module loaded
[ 0.207318] loop: module loaded
[ 0.210381] usbcore: registered new interface driver smsc95xx
[ 0.213257] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 0.244050] dwc_otg 20980000.usb: base=0xf0980000
[ 0.446874] Core Release: 2.80a
[ 0.449545] Setting default values for core params
[ 0.452219] Finished setting default values for core params
[ 0.654942] Using Buffer DMA mode
[ 0.657569] Periodic Transfer Interrupt Enhancement - disabled
[ 0.660189] Multiprocessor Interrupt Enhancement - disabled
[ 0.662845] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 0.665508] Dedicated Tx FIFOs mode
[ 0.668949] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xdad14000 dma = 0x5ad14000 len=9024
[ 0.674627] FIQ FSM acceleration enabled for :
[ 0.674627] Non-periodic Split Transactions
[ 0.674627] Periodic Split Transactions
[ 0.674627] High-Speed Isochronous Endpoints
[ 0.674627] Interrupt/Control Split Transaction hack enabled
[ 0.687864] dwc_otg: Microframe scheduler enabled
[ 0.688061] WARN::hcd_init_fiq:459: FIQ on core 0 at 0xc03e48e4
[ 0.690744] WARN::hcd_init_fiq:460: FIQ ASM at 0xc03e4b6c length 36
[ 0.693427] WARN::hcd_init_fiq:486: MPHI regs_base at 0xf0006000
[ 0.696200] dwc_otg 20980000.usb: DWC OTG Controller
[ 0.698901] dwc_otg 20980000.usb: new USB bus registered, assigned bus number 1
[ 0.701624] dwc_otg 20980000.usb: irq 56, io mem 0x00000000
[ 0.704320] Init: Port Power? op_state=1
[ 0.706953] Init: Power Port (0)
[ 0.709822] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.712586] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.715268] usb usb1: Product: DWC OTG Controller
[ 0.717872] usb usb1: Manufacturer: Linux 4.14.180 dwc_otg_hcd
[ 0.720439] usb usb1: SerialNumber: 20980000.usb
[ 0.723816] hub 1-0:1.0: USB hub found
[ 0.726471] hub 1-0:1.0: 1 port detected
[ 0.729748] dwc_otg: FIQ enabled
[ 0.729757] dwc_otg: NAK holdoff enabled
[ 0.729762] dwc_otg: FIQ split-transaction FSM enabled
[ 0.729778] Module dwc_common_port init
[ 0.730252] usbcore: registered new interface driver uas
[ 0.733027] usbcore: registered new interface driver usb-storage
[ 0.735599] mousedev: PS/2 mouse device common for all mice
[ 0.738016] i2c /dev entries driver
[ 0.741345] bcm2835-wdt 20100000.watchdog: Broadcom BCM2835 watchdog timer
[ 0.744558] bcm2835-cpufreq: min=700000 max=1000000
[ 0.747851] sdhci: Secure Digital Host Controller Interface driver
[ 0.750514] sdhci: Copyright(c) Pierre Ossman
[ 0.753702] mmc-bcm2835 20300000.mmc: could not get clk, deferring probe
[ 0.756990] sdhost-bcm2835 20202000.mmc: could not get clk, deferring probe
[ 0.759946] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.764408] vchiq: vchiq_init_state: slot_zero = dad80000, is_master = 0
[ 0.768287] [vc_sm_connected_init]: start
[ 0.777961] [vc_sm_connected_init]: end - returning 0
[ 0.781216] NET: Registered protocol family 10
[ 0.784770] Segment Routing with IPv6
[ 0.786791] NET: Registered protocol family 17
[ 0.788732] 8021q: 802.1Q VLAN Support v1.8
[ 0.797022] uart-pl011 20201000.serial: cts_event_workaround enabled
[ 0.799166] 20201000.serial: ttyAMA0 at MMIO 0x20201000 (irq = 81, base_baud = 0) is a PL011 rev2
[ 0.804877] console [ttyS0] disabled
[ 0.807063] 20215040.serial: ttyS0 at MMIO 0x0 (irq = 160, base_baud = 31250000) is a 16550
[ 1.590550] console [ttyS0] enabled
[ 1.597459] mmc-bcm2835 20300000.mmc: mmc_debug:0 mmc_debug2:0
[ 1.605648] mmc-bcm2835 20300000.mmc: DMA channel allocated
[ 1.613712] Indeed it is in host mode hprt0 = 00021501
[ 1.689171] random: fast init done
[ 1.734779] sdhost: log_buf @ dad13000 (5ad13000)
[ 1.780850] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 1.790147] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.799323] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.809721] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 1.822208] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ 1.830594] of_cfs_init
[ 1.835099] of_cfs_init: OK
[ 1.840507] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 1.849151] Indeed it is in host mode hprt0 = 00001101
[ 1.916567] Waiting for root device /dev/mmcblk0p2...
[ 2.037001] mmc1: new high speed SDIO card at address 0001
[ 2.057638] mmc0: host does not support reading read-only switch, assuming write-enable
[ 2.076136] mmc0: new high speed SDHC card at address aaaa
[ 2.084268] mmcblk0: mmc0:aaaa SL16G 14.8 GiB
[ 2.096932] mmcblk0: p1 p2
[ 2.103978] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101
[ 2.112763] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.121925] usb 1-1: Product: USB 2.0 Hub
[ 2.128629] hub 1-1:1.0: USB hub found
[ 2.135367] hub 1-1:1.0: 4 ports detected
[ 2.144732] VFS: Mounted root (squashfs filesystem) readonly on device 179:2.
[ 2.156863] Freeing unused kernel memory: 1024K
[ 2.478206] init: Console is alive
[ 2.484145] init: - watchdog -
[ 2.550827] usb 1-1.4: new full-speed USB device number 3 using dwc_otg
[ 2.733365] usb 1-1.4: New USB device found, idVendor=231d, idProduct=0200
[ 2.742612] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.752192] usb 1-1.4: Product: VKB-Sim Gladiator NXT R
[ 2.759787] usb 1-1.4: Manufacturer: © Alex Oz 2012-2019
[ 2.931462] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 3.005130] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 3.025272] init: - preinit -
[ 3.555593] random: jshn: uninitialized urandom read (4 bytes read)
[ 3.600794] random: jshn: uninitialized urandom read (4 bytes read)
[ 3.635733] random: jshn: uninitialized urandom read (4 bytes read)
[ 6.256924] F2FS-fs (loop0): Mounted with checkpoint version = 5ccce2a0
[ 6.268432] mount_root: switching to f2fs overlay
[ 6.354169] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 6.371868] urandom-seed: Seeding with /etc/urandom.seed
[ 6.454331] procd: - early -
[ 6.459542] procd: - watchdog -
[ 7.124332] procd: - watchdog -
[ 7.130765] procd: - ubus -
[ 7.192566] urandom_read: 1 callbacks suppressed
[ 7.192576] random: ubusd: uninitialized urandom read (4 bytes read)
[ 7.208657] random: ubusd: uninitialized urandom read (4 bytes read)
[ 7.217693] random: ubusd: uninitialized urandom read (4 bytes read)
[ 7.227508] procd: - init -
[ 7.789784] kmodloader: loading kernel modules from /etc/modules.d/*
[ 7.874942] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 7.901931] urngd: jent-rng init failed, err: 2
[ 7.913553] hidraw: raw HID events driver (C) Jiri Kosina
[ 7.927199] bcm2835_alsa bcm2835_alsa: card created with 8 channels
[ 7.944268] usbcore: registered new interface driver asix
[ 7.953596] usbcore: registered new interface driver ax88179_178a
[ 7.965378] Loading modules backported from Linux version v4.19.120-0-gfdc072324f3c
[ 7.976743] Backport generated by backports.git v4.19.120-1-0-g60c3a249
[ 7.988652] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 8.005572] nf_conntrack version 0.5.0 (7168 buckets, 28672 max)
[ 8.050802] usbcore: registered new interface driver r8152
[ 8.077188] xt_time: kernel timezone is -0000
[ 8.125213] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[ 8.261860] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.raspberrypi,model-zero-w.txt failed with error -2
[ 8.278675] brcmfmac mmc1:0001:1: Falling back to user helper
[ 8.329819] firmware brcm!brcmfmac43430-sdio.raspberrypi,model-zero-w.txt: firmware_loading_store: map pages failed
[ 8.519456] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[ 8.533489] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.clm_blob failed with error -2
[ 8.548949] brcmfmac mmc1:0001:1: Falling back to user helper
[ 8.573443] firmware brcm!brcmfmac43430-sdio.clm_blob: firmware_loading_store: map pages failed
[ 8.587871] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-11), device may have limited channels available
[ 8.608978] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Oct 23 2017 03:55:53 version 7.45.98.38 (r674442 CY) FWID 01-e58d219f
[ 8.681916] usbcore: registered new interface driver brcmfmac
[ 8.738334] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 13.957164] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 15.872546] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 24.792227] usb 1-1.4: reset full-speed USB device number 3 using dwc_otg
[ 25.252213] usb 1-1.4: reset full-speed USB device number 3 using dwc_otg
[ 25.624800] random: crng init done
[ 25.631894] random: 3 urandom warning(s) missed due to ratelimiting
[ 48.282238] usb 1-1.3: new full-speed USB device number 4 using dwc_otg
[ 48.438984] usb 1-1.3: New USB device found, idVendor=0738, idProduct=a221
[ 48.449756] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=4
[ 48.460775] usb 1-1.3: Product: Saitek Pro Flight X-56 Rhino Throttle
[ 48.470835] usb 1-1.3: Manufacturer: Mad Catz
[ 48.478635] usb 1-1.3: SerialNumber: ko058110
[ 48.602210] usb 1-1.3: reset full-speed USB device number 4 using dwc_otg
[ 49.062236] usb 1-1.3: reset full-speed USB device number 4 using dwc_otg
root@CloudHub_1e093d:~#


perhaps spoke too soon, in second session of usage the pi went away mid flight, leaving me unable to control my ship in Elite Dangerous :(

Will you comp a license for the replacement unit? this is the main thing that has me trying to get it working befgore changing hardware

Email sent